Dynamic Host Configuration Protocol (DHCP)
Overview and Purpose
- Concept: DHCP (Dynamic Host Configuration Protocol) allows hosts (clients) to automatically and dynamically learn network configuration parameters without manual static configuration.
- Details:
- Parameters Learned: IP address, subnet mask, default gateway, DNS (Domain Name System) server, domain name.
- Typical Clients: End devices (PCs, smartphones, IP phones).
- Typical Servers: Windows/Linux servers in enterprise networks; home routers in small networks.
- Lease Time: The duration a client can use an IP address. Clients must release or renew it upon expiration. Prevents IP exhaustion in transient environments (e.g., cafes, airports).
- Static vs Dynamic: Network devices (routers, servers) usually require static IPs. DHCP is primarily for client endpoints.
DHCP Ports and Protocol Details
- Transport Protocol: UDP (User Datagram Protocol)
- Ports:
- DHCP Server: UDP Port 67
- DHCP Client: UDP Port 68
- Magic Cookie: A specific field in DHCP packets used to identify the protocol and differentiate it from BOOTP (Bootstrap Protocol, DHCP’s predecessor).
DHCP Options
DHCP messages contain “options” that convey specific configuration data to the client.
| Option | Purpose |
|---|---|
| 53 | DHCP Message Type (e.g., Discover, Offer) |
| 51 | Lease Time duration |
| 6 | Domain Name Server (DNS) IP address |
| 3 | Router (Default Gateway) IP address |
| 54 | Server Identifier (used in Request to select a specific server) |
The DHCP Message Exchange (DORA)
The process a client uses to obtain an IP address is remembered by the acronym DORA.
| Message | Direction | Source IP | Dest IP | Broadcast/Unicast | Purpose |
|---|---|---|---|---|---|
| Discover | Client ➔ Server | 0.0.0.0 | 255.255.255.255 | Broadcast | Client looks for available DHCP servers. |
| Offer | Server ➔ Client | Server IP | Offered IP / 255.255.255.255 | Unicast or Broadcast | Server offers an IP and configuration parameters. |
| Request | Client ➔ Server | 0.0.0.0 | 255.255.255.255 | Broadcast | Client accepts the offer (specifies chosen server via Option 54). |
| Ack | Server ➔ Client | Server IP | Client IP / 255.255.255.255 | Unicast or Broadcast | Server confirms the lease; client configures the interface. |
| Release | Client ➔ Server | Client IP | Server IP | Unicast | Client voluntarily gives up the IP address. |
Things to note:
- Unicast vs Broadcast in Offer/Ack: Depends on the client’s capability. If the client sets the Broadcast Flag in the
Bootp flagsfield to1, the server must broadcast. If set to0(Unicast), the server can send the Offer/Ack directly to the client’s MAC and offered IP. - Multiple Servers: If multiple servers respond to Discover, the client accepts the first Offer and broadcasts the Request so all servers know which one was selected.
- Discover and Request are ALWAYS broadcast messages.
sequenceDiagram
participant Client
participant Server
Client->>Server: DHCP Discover (Broadcast)
Server->>Client: DHCP Offer (Unicast/Broadcast)
Client->>Server: DHCP Request (Broadcast)
Server->>Client: DHCP Ack (Unicast/Broadcast)
DHCP Relay Agent
- Concept: Routers do not forward broadcast traffic by default. If a centralized DHCP server is on a different subnet, clients cannot reach it via broadcasts.
- Solution: Configure the router’s interface facing the clients as a DHCP Relay Agent.
- Mechanism:
- Client broadcasts DHCP Discover.
- Relay agent intercepts the broadcast and converts it to a Unicast message directed to the centralized DHCP server’s IP.
- The source IP of the relayed packet becomes the relay agent’s interface IP.
- The server unicasts the Offer back to the relay agent, which forwards it to the client.
Cisco IOS Configuration: DHCP Server
To configure a Cisco router as a DHCP server:
! Exclude addresses from being handed out (e.g., for static devices)
Router(config)# ip dhcp excluded-address 192.168.1.1 192.168.1.10
! Create the DHCP pool
Router(config)# ip dhcp pool MY_POOL
Router(dhcp-config)# network 192.168.1.0 255.255.255.0
Router(dhcp-config)# default-router 192.168.1.1
Router(dhcp-config)# dns-server 8.8.8.8
Router(dhcp-config)# domain-name jeremysitlab.com
Router(dhcp-config)# lease 0 5 30
! Format: lease [days] [hours] [minutes]. 0 days, 5 hours, 30 mins.
! Can also use 'lease infinite' (not recommended).
Things to note:
- You must create a separate pool for each subnet the router is serving.
ip dhcp excluded-addressprevents the router from assigning specific IPs (like the router’s own interface IP or server IPs).
Cisco IOS Configuration: DHCP Relay Agent
To forward DHCP broadcasts to a remote server:
! Enter the interface connected to the DHCP clients
Router(config)# interface GigabitEthernet0/1
Router(config-if)# ip helper-address 192.168.10.10
! 192.168.10.10 is the IP of the centralized DHCP server
Things to note:
ip helper-addressactually forwards several UDP broadcasts (ports 37, 49, 53, 67, 68, 69, 137, 138), not just DHCP (port 67).- Ensure the router has a route to reach the DHCP server’s IP.
Cisco IOS Configuration: DHCP Client
To configure a router interface to obtain an IP via DHCP (rare, but used for internet-facing interfaces or lab environments):
Router(config)# interface GigabitEthernet0/1
Router(config-if)# ip address dhcp
Verification and Troubleshooting Commands
Cisco IOS Commands
! View currently assigned IP addresses and lease expirations
Router# show ip dhcp binding
! View interface configuration and verify if IP is determined by DHCP
Router# show ip interface GigabitEthernet0/1
! View DHCP pool statistics and conflicts
Router# show ip dhcp pool
Router# show ip dhcp server statistics
Windows Command Prompt Commands
:: View full IP configuration including DHCP status, lease obtained/expiration, DNS, Gateway
C:\> ipconfig /all
:: Release the current DHCP-leased IP address (sends DHCP Release message)
C:\> ipconfig /release
:: Request a new IP address (sends DHCP Discover message)
C:\> ipconfig /renew
Exam Insights & Common Misconceptions
- When to use a Relay Agent: Configure it when the router is not a DHCP server, there are DHCP clients in the router’s connected LAN, and there is no other DHCP server in that connected LAN.
- Which messages can be Unicast?: DHCP Offer, DHCP Ack, and DHCP Release can be sent using unicast. DHCP Discover and DHCP Request are always broadcast.
- Bootp Flags: If the broadcast flag in the
Bootp flagsfield is set to1, the destination IP of the Offer/Ack from the server will be255.255.255.255. - IPCONFIG /RENEW: This command forces the PC to release its current IP and broadcast a new DHCP Discover message to get an IP address.
Summary of Commands
| Command | Mode | Purpose |
|---|---|---|
ip dhcp excluded-address [start] [end] |
Global Config | Reserves IPs from the DHCP pool. |
ip dhcp pool [name] |
Global Config | Creates a DHCP pool. |
network [ip] [mask] |
DHCP Config | Defines the subnet for the pool. |
default-router [ip] |
DHCP Config | Assigns the default gateway to clients. |
dns-server [ip] |
DHCP Config | Assigns the DNS server to clients. |
domain-name [name] |
DHCP Config | Assigns the domain name to clients. |
lease [days] [hours] [minutes] |
DHCP Config | Sets the IP lease duration. |
ip helper-address [server-ip] |
Interface Config | Configures the interface as a DHCP Relay Agent. |
ip address dhcp |
Interface Config | Configures the interface as a DHCP Client. |
show ip dhcp binding |
Privileged EXEC | Displays active DHCP leases. |
Complete Command List
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp pool MY_POOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8
domain-name jeremysitlab.com
lease 0 5 30
interface GigabitEthernet0/1
ip helper-address 192.168.10.10
interface GigabitEthernet0/1
ip address dhcp
show ip dhcp binding
show ip interface GigabitEthernet0/1
show ip dhcp pool
show ip dhcp server statistics