Domain 1Security & Risk ManagementADVANCED

Risk Management & Threat Modeling

Quantitative and qualitative risk analysis formulas (ALE, SLE, ARO), threat modeling methodologies (STRIDE, PASTA, DREAD), and risk treatment options.

Domain: Domain 1: Security and Risk Management•Updated: 2026-08-26
#Risk Management#Threat Modeling#STRIDE#PASTA#DREAD#ALE#SLE#ARO#Risk Treatment

CISSP Domain 1: Risk Management & Threat Modeling — Mindmap Review Study Guide

═══════════════════════════════════

PART 1: MERMAID MINDMAP

═══════════════════════════════════

mindmap
  root((Risk Management))
    Core Concepts
      Identification Assessment Prioritization
      Economical Resource Application
      Three Major Steps
    Asset Valuation
      Quantitative Analysis
      Qualitative Analysis
    Risk Analysis
      Threats
      Threat Modeling
        STRIDE
        PASTA
        DREAD
      Vulnerabilities
      Vulnerability Assessment
      Penetration Testing
      Likelihood
      Impact
      Quantitative Risk Analysis
        ALE Calculation
        SLE
          Asset Value
          Exposure Factor
        ARO
      Qualitative Risk Analysis
    Risk Treatment
      Avoid
      Transfer
      Mitigate
        Residual Risk
        Administrative Controls
        Technical Logical Controls
        Physical Controls
        Safeguards
          Directive Controls
          Deterrent Controls
          Preventative Controls
        Countermeasures
          Detective Controls
            SIEM
            IDS
          Corrective Controls
          Recovery Controls
            DRP
          Compensating Controls
        Functional Aspect
        Assurance Aspect
      Accept
        Asset Owner Accountability
    Risk Frameworks
      RMF NIST 800-37
        Prepare
        Categorize
        Select
        Implement
        Assess
        Authorize
        Monitor
      ISO 31000
      COSO
      ISACA Risk IT

═══════════════════════════════════

PART 2: TECHNICAL DEFINITIONS & CONCEPTS

═══════════════════════════════════

Core Concepts

Risk Management — An essential component of any comprehensive security program focused on the identification, assessment, and prioritization of risks, and the economical application of resources to minimize, monitor, and control the probability and/or impact of those risks. It enables organizations to prioritize security efforts and allocate resources effectively given limited budgets and time.

Asset Valuation

Asset Valuation — The process of assigning a value to each asset to figure out how valuable it is to the organization, allowing assets to be ranked from most to least valuable.

Analysis Type Definition Usage & Characteristics
Quantitative Analysis Assigns exact monetary values to each asset (e.g., $2.7 million). Absolutely the preferred method, but often impossible to determine with reasonable accuracy for things like reputation or data.
Qualitative Analysis A relative ranking system comparing assets against each other (e.g., high, medium, low value categories). Used the vast majority of the time when exact monetary values cannot be accurately assigned.

Risk Analysis

Risk Analysis — The step where you identify the risks associated with each ranked asset by looking at four things: threats, vulnerabilities, impact, and likelihood.

Threats — Any potential danger; events, situations, or actions that have the potential to cause harm or damage to assets, operations, or reputation. Sources include natural disasters, cyber attacks, fraud, theft, or human error.

Threat Modeling Methodologies — Tools used to systematically identify threats related to an asset.

Methodology Purpose Characteristics
STRIDE Identify threats. Quick & easy, but not super thorough.
PASTA Identify threats. Super time-consuming, in-depth, 7-step, risk-centric. Accounts for business value, compliance, and provides strategic analysis.
DREAD Prioritize already identified threats. Not used to identify threats. Often used together with STRIDE (STRIDE identifies, DREAD prioritizes).

STRIDE — A quick and easy threat modeling methodology. ⚠️ EXAM TIP: For the exam, know that the S stands for Spoofing (transcript explicitly states this is a violation of integrity), and the T stands for Tampering (which is a violation of integrity).

PASTA — Process for Attack Simulation and Threat Analysis. A super time-consuming, in-depth, 7-step, risk-centric methodology that provides highly useful, nuanced results by taking into account business value, compliance issues, and strategic threat analysis.

DREAD — A methodology used strictly to prioritize a list of threats that have already been identified, not to identify them. Often used in tandem with STRIDE.

Vulnerabilities — Weaknesses or gaps in an organization’s security or control systems that can be exploited by a threat to cause harm or damage.

Vulnerability Assessment & Penetration Testing — Two techniques used to systematically identify vulnerabilities (to be covered in further detail in Domain 6).

Likelihood — Also known as probability; the chance that a particular risk event will occur, measuring the likelihood of a potential risk turning into an actual event.

Impact — The potential harm or damage that could result from a risk occurring (e.g., downtime, reputational damage, data integrity issues, breach, ransomware).

Quantitative Risk Analysis — Calculating exactly how much a given risk is going to cost the organization per year, which makes it easier to determine what controls are cost-justified.

ALE Calculation — Annualized Loss Expectancy Calculation. A formula used to calculate exactly how much a risk will cost the organization per year. ⚠️ EXAM TIP: You definitely need to know this formula for the exam.

  • Formula: ALE = SLE(Value x Exposure) x ARO

SLE — Single Loss Expectancy. How much a risk is going to cost the organization if the risk occurs exactly once. Calculated by multiplying Asset Value times the Exposure Factor.

Asset Value — Simply what the asset is worth.

Exposure Factor — A percentage representing what percent of the asset you expect to lose if the risk occurs (e.g., 10% means you lose 10% of the asset; 100% means you lose ALL of the asset).

ARO — Annualized Rate of Occurrence. Represents how many times per year you expect a risk to occur (e.g., 1 = once per year; 5 = five times per year).

Qualitative Risk Analysis — A relative ranking system used to rank risks. Because the exact numbers required for ALE are often impossible to determine accurately, qualitative analysis is forced to be used most of the time.

Risk Treatment

Treatment — The third major step of Risk Management where you figure out how to treat the identified risks. There are 4 major methods: Avoid, Transfer, Mitigate, and Accept.

Avoid — Implementing measures to prevent the risk from occurring, or choosing not to engage in activities that would cause the risk to occur.

Transfer — Buying an insurance policy to transfer the financial burden of a particular risk to the insurer. ⚠️ EXAM TIP: From a security perspective, you can never transfer or delegate accountability.

Mitigate — Implementing various controls to reduce the risk. It is impossible to find a perfect set of controls that will completely eliminate a risk.

Residual Risk — The risk that is left over after mitigating controls have been implemented.

Administrative Controls — Policies, procedures, and organizational practices put in place to manage risks (e.g., security policies, employee training and awareness).

Technical / Logical Controls — Technologies put in place to manage risks (e.g., firewalls, encryption, automated backups).

Physical Controls — Physical security measures put in place to manage risks (e.g., fences, cameras, locks, fire suppression systems).

Safeguards vs Countermeasures — Controls are categorized into two major groups based on when they act upon a risk.

Category Purpose Included Controls
Safeguards Controls put in place to try and ensure a risk doesn’t occur. Directive, Deterrent, Preventative
Countermeasures Controls put in place to detect and respond to a risk that has already occurred. Detective, Corrective, Recovery, Compensating

Directive Controls — Measures that provide guidance and instruction to personnel on how to handle risks; they direct behavior (e.g., policies).

Deterrent Controls — Measures that discourage individuals from engaging in risky behavior. Keyword is discourage; they do not prevent someone from doing something, they only discourage them (e.g., a “private property” sign).

Preventative Controls — Measures that aim to prevent or stop a risk from occurring (e.g., razor wire topped fences, login mechanisms, firewalls).

Detective Controls — Measures that help identify risks that have occurred or are currently ongoing (e.g., smoke detectors).

SIEM — Security Information and Event Management systems. A detective control used to identify risks that have occurred or are ongoing.

IDS — Intrusion Detection System. A technical/logical detective control used to identify ongoing or past risks.

Corrective Controls — Measures that aim to reduce the negative impacts of risks after they have occurred (e.g., a fire suppression system activating to put out a fire).

Recovery Controls — Measures that help organizations recover from negative impacts and get back to business as usual.

DRP — Disaster Recovery Plan. A recovery control example that helps an organization recover from the negative impacts of risks.

Compensating Controls — Measures put in place to mitigate negative impacts when other controls are not effective or feasible; they essentially make up for the lack of a better control.

Functional vs Assurance — Every good control is supported by these two key aspects.

Aspect Definition Example
Functional The function that a control is meant to perform. A firewall’s function is to control the flow of traffic between two network segments.
Assurance The ability to get assurance that a control is working correctly on an ongoing basis. Logging and monitoring a firewall to ensure it continues to work correctly.

Accept — A deliberate decision to accept a certain level of risk and its potential consequences. ⚠️ EXAM TIP: The asset OWNER should be the one accepting the risk, because owners are accountable for the security of an asset and are best positioned to make this decision.

Risk Frameworks

Risk Frameworks — Structured and systematic approaches to managing risks within an organization.

RMF (NIST 800-37) — The Risk Management Framework, a National Institute of Standards and Technology (NIST) publication defining a structured, seven-step process to manage risks to information systems and data. ⚠️ EXAM TIP: You need to remember the 7 steps at a high-level, the order of the steps, and what is happening at each step.

  1. Prepare to execute the RMF
  2. Categorize systems - this step is essentially focused on identify the risks
  3. Select security controls - select the appropriate mitigating controls for the risks you identified
  4. Implement the controls
  5. Assess the effectiveness of the implemented controls
  6. Authorize, based on the results of the assessment, ideally the owner of the system should make the decision as to whether the system can be put into production.
  7. Monitor. Perform ongoing monitoring of the controls to ensure they continue to operate effectively in production.

ISO 31000 — A risk management framework (you should be able to recognize the name).

COSO — A risk management framework (you should be able to recognize the name).

ISACA Risk IT — A risk management framework (you should be able to recognize the name).