Domain 4Network SecurityCORE

Remote Access, Zero Trust & Perimeter Defense

Secure remote access protocols (RADIUS, TACACS+, Diameter), AAA frameworks, Zero Trust Network Architecture (ZTNA), and software-defined perimeters.

Domain: Domain 4: Communication and Network Security•Updated: 2026-08-26
#Remote Access#Zero Trust#ZTNA#RADIUS#TACACS+#EAP#Microsegmentation

CISSP Domain 4: Remote Access, Zero Trust & Perimeter Defense — Mindmap Review Study Guide

═══════════════════════════════════

PART 1: MERMAID MINDMAP

═══════════════════════════════════

mindmap
  root((Remote Access))
    Tunneling Concepts
      Tunneling process
      Private IP addresses
      IPv6 over IPv4
    Basic Tunneling Protocols
      GRE
      PPTP
      L2TP
      Split tunneling
    Encryption and VPN
      Encryption purpose
      VPN definition
    IPSec Suite
      IPSec
      AH mode
      ESP mode
      Transport mode
      Tunnel mode
      IKE
      Security Association
      Simplex communication
      X.509 certificates
      Diffie-Hellman
    SSL and TLS
      SSL and TLS naming
      Client hello
      Server hello
      Session key
      Mutual authentication
      Unencrypted SSL
    Other VPN Protocols
      SOCKS
      SSH
    Remote Authentication
      Triple A services
      RADIUS
      TACACS+
      Diameter
      EAP
    Remote Management
      SNMP
      SNMP version 1
      SNMP version 2
      SNMP version 3
      Telnet

═══════════════════════════════════

PART 2: TECHNICAL DEFINITIONS & CONCEPTS

═══════════════════════════════════

Tunneling Concepts

Tunneling — Encapsulating an entire packet within the data portion of another packet, essentially adding a new header. Allows connecting private networks across a public network or encapsulating foreign protocols.

Private IP Addresses — IP addresses (e.g., 10.0.x.x) used on private networks that are not routable across the public internet, requiring tunneling to reach public destinations.

Foreign Protocol Encapsulation — Encapsulating a protocol to run over a network that does not support it, such as sending IPv6 packets across an IPv4 network.

Basic Tunneling Protocols

GRE (Generic Routing Encapsulation) — A simple tunneling protocol that encapsulates a wide variety of network protocols to create point-to-point connections, allowing two networks to pass traffic across a third network like the internet.

PPTP (Point-to-Point Tunneling Protocol) — An obsolete tunneling protocol with many well-known security vulnerabilities that does not provide encryption or authentication by itself; must be combined with other protocols to create VPNs.

L2TP (Layer 2 Tunneling Protocol) — A successor to PPTP that includes improvements like the ability to encrypt control messages, but importantly does not encrypt the data portion of a packet on its own.

Split Tunneling — Routing some traffic through a secure encrypted tunnel (e.g., to a corporate network) while sending other traffic straight to the internet.

  • Performance benefit: Speeds up internet-bound traffic by not routing it through the tunnel first.
  • Security concern: Traffic going straight to the internet bypasses corporate security controls.

Encryption and VPN

Encryption — The process of encrypting the data portion of a packet sent through a tunnel to provide confidentiality, as data transiting the public internet should be assumed to be inspected by others.

VPN (Virtual Private Network) — An encrypted tunnel where the data sent through the tunnel is encrypted, combining tunneling and encryption.

IPSec Suite

IPSec (IP Security) — A standardized suite of protocols that work together to create a VPN, offering a massive degree of flexibility in configuration.

IPSec Modes Comparison — The transcript explicitly references a 2x2 matrix showing how these modes fit together:

Security Protocol Provides Function
AH (Authentication Header) Integrity, data-origin authentication, and replay protection Technically just a tunnel (no payload encryption)
ESP (Encapsulating Security Payload) Everything in AH plus confidentiality (encrypts data payload) Functions as a true VPN
Encapsulation Mode Header Handling
Transport Mode Original packet header is re-used
Tunnel Mode New header is created, encapsulating the original packet header and payload

⚠️ EXAM TIP: Memorize this 2x2 matrix to understand how the different combinations of AH/ESP and Transport/Tunnel modes provide different levels of security and encapsulation.

IKE (Internet Key Exchange) — The protocol used to establish Security Associations between entities.

Security Association (SA) — A simplex establishment of attributes such as the authentication algorithm, encryption algorithm, and encryption keys to be used when establishing a connection.

Simplex Communication — Communication that only flows in one direction; because SAs are simplex, establishing a back-and-forth tunnel requires 2 SAs, and adding encryption in both directions requires a total of 4 SAs for an IPSec VPN.

X.509 Digital Certificates — Certificates used by entities to authenticate each other during the establishment of an IPSec connection.

Diffie-Hellman Key Exchange Protocol — A protocol used by entities to exchange symmetric encryption keys when establishing an IPSec connection.

SSL and TLS

SSL/TLS Naming and Versions — SSL and TLS are the exact same protocol.

Name Versions / Layer Notes
SSL (Secure Sockets Layer) First three major versions Original name of the protocol
TLS (Transport Layer Security) Most recent versions Renamed to reflect it operates at Layer 4 (Transport layer) of OSI model

Primarily created to authenticate and encrypt connections between web browsers and servers, but can also create VPNs.

TLS Connection Steps — The exact ordered steps to establish a TLS connection:

  1. Client sends a client hello message, telling the server which TLS version and encryption algorithms it supports.
  2. Server responds with a server hello message, which importantly includes a copy of the server’s digital certificate.
  3. Client decrypts the server’s digital certificate to authenticate the server, generates a new symmetric encryption key (session key), and encrypts this key with the server’s public key obtained from the certificate.
  4. Client sends the encrypted session key to the server, which decrypts it with the server’s private key; both now share the symmetric session key to efficiently encrypt data back and forth.

Session Key — A newly generated symmetric encryption key created by the client during the TLS handshake and encrypted with the server’s public key.

Mutual Authentication — A TLS configuration where the client sends its own digital certificate in the initial client hello message, allowing the server to authenticate the client so both parties authenticate each other.

Unencrypted SSL — A mode of SSL/TLS where an encrypted connection is not required, but authentication is still required.

Other VPN Protocols

SOCKS (Socket Secure Protocol) — A VPN protocol that operates at Layer 5, the session layer of the OSI model.

SSH (Secure Shell Protocol) — A protocol that operates at Layer 7, the application layer of the OSI model, used for secure remote connections.

Remote Authentication

Triple A Services — The three core functions of remote authentication protocols: Authentication, Authorization, and Accounting for user access and usage.

RADIUS vs TACACS+ — Both protocols provide Triple A services, but differ in security:

Protocol Function Security / Encryption
RADIUS (Remote Authentication Dial-In User Service) Originally designed for dial-up to allow users to connect to and access network resources Poorly obfuscates the user’s password
TACACS+ (Terminal Access Controller Access Control System Plus) Performs the exact same Triple A functions as RADIUS Encrypts the full contents of the packets it transmits

Diameter — The successor to RADIUS that adds security features, including support for EAP.

EAP (Extensible Authentication Protocol) — A protocol supported by Diameter that allows for much more secure and robust authentication of users.

Remote Management

SNMP (Simple Network Management Protocol) — A powerful protocol used to collect real-time information from network devices (performance metrics, alerts, configuration) and send commands to reconfigure them.

SNMP Versions Comparison — The security improvements across SNMP versions:

Version Security Features
SNMP v1 Sends passwords in clear text (total dumpster fire)
SNMP v2 Allows password hashing, but not by default
SNMP v3 Huge improvement from a security perspective; must use this version

⚠️ EXAM TIP: Remember the speaker’s mnemonic that SNMP stands for “Security’s Not My Problem” due to the severe security flaws in the first couple of versions.

Telnet — A protocol that allows you to remotely connect to a network device, like a server, to get command-line interface access.