Problem Breakdown
We need to assign one bike to each worker on a 2D grid based on proximity rules. The core logic is greedy: always pick the closest available pair (worker-bike). If distances are equal, we prioritize lower worker indices; if those match too, we prioritize lower bike indices.
- Inputs: Two lists of coordinates (
workers,bikes). Lengths and , where . - Output: A list of length , where index holds the 0-indexed ID of the bike assigned to worker .
- Constraints & Edge Cases:
- Coordinates are non-negative integers < 1000.
- Locations are distinct (no overlapping points).
- Since , every worker will eventually get a bike; we don’t need to handle “unassigned” states for workers, only tracking available bikes is crucial during the greedy selection process.
Intuition
A naive simulation might try to find the closest pair, assign it, and then re-scan all remaining pairs repeatedly. This repeated scanning leads to or worse depending on implementation because we are essentially doing a “find min” operation inside a loop that shrinks by 1 each time.
To optimize this:
- Pre-calculation: We can calculate the distance for every possible worker-bike pair upfront ( pairs).
- Sorting: If we store all these potential assignments as tuples
(distance, worker_index, bike_index), sorting them once allows us to process candidates in strictly increasing order of priority (Distance Worker ID Bike ID). This matches the problem’s tie-breaking rules exactly because Python sorts tuples element-wise. - Greedy Assignment: We iterate through this sorted list. The first time we encounter a pair where both the worker and bike are still available, that is our optimal assignment for that specific step in the greedy process.
Approach
- Initialize an empty list
pairsto store tuples of(distance, worker_idx, bike_idx). - Iterate through each worker from to .
- For every worker, iterate through each bike from to .
- Calculate Manhattan distance:
abs(w[0]-b[0]) + abs(w[1]-b[1]). - Append the tuple
(distance, i, j)topairs. - Sort
pairsin ascending order (Python handles this automatically based on tuple structure). - Initialize a boolean array
used_bikesof size set to False and an answer listansof size . - Iterate through the sorted
pairs. For each(dist, w_idx, b_idx):- If worker
w_idxis not yet assigned (we can track this or just check if we filled all slots): Actually simpler: We iterate until we have found assignments for workers? No, because a specific bike might be needed by multiple workers. - Better logic inside loop: Check if the current worker
w_idxhas already been assigned (we can track this inans) AND if the bikeb_idxis not used (used_bikes[b_idx] == False). - If both conditions are met, assign it:
ans[w_idx] = b_idx, markused_bikes[b_idx] = True.
- If worker
- Return
ans. Note that since we sort by distance first, the first valid assignment for a worker in this sorted list is guaranteed to be their optimal bike given current availability constraints of other workers (who might have higher priority due to lower indices).
Complexity Analysis
- Time: . We generate pairs. Sorting takes logarithmic time relative to the number of elements (). Iterating through the sorted list is linear . Given constraints , , which fits comfortably within typical execution limits (usually ops/sec).
- Space: to store the list of pairs. We also use for tracking used bikes and output array.
Solution
class Solution:
def assignBikes(self, workers: List[List[int]], bikes: List[List[int]]) -> List[int]:
# Store tuples as (distance, worker_index, bike_index)
pairs = []
for i in range(len(workers)):
w_x, w_y = workers[i]
for j in range(len(bikes)):
b_x, b_y = bikes[j]
dist = abs(w_x - b_x) + abs(w_y - b_y)
pairs.append((dist, i, j))
# Sort by distance (primary), worker index (secondary), bike index (tertiary)
pairs.sort()
ans = [-1] * len(workers)
used_bikes = [False] * len(bikes)
for dist, w_idx, b_idx in pairs:
# If the current pair involves an unassigned worker and available bike
if not used_bikes[b_idx]:
ans[w_idx] = b_idx
used_bikes[b_idx] = True
return ans
Edge Cases Handled
-
Tie-breaking: The tuple sort order
(dist, w_idx, b_idx)ensures that equal distances are resolved by worker index first (as required), then bike index. -
Multiple workers/bikes with same distance: Since we iterate through the sorted list and mark bikes as used immediately upon assignment, subsequent pairs involving the same bike will be skipped (
used_bikescheck). Pairs involving different bikes for the same worker won’t happen because a worker is only assigned once in our logic (we rely onans[w_idx] != -1implicitly? Actually, my code above checksif not used_bikes[b_idx]. Wait.- Correction needed in thought process: The problem says “choose pair with smallest worker index”. If Worker 0 has a bike at dist 5 and Bike A is taken by someone else closer to them later? No, the greedy rule implies we pick the global minimum distance available.
- My code logic
if not used_bikes[b_idx]inside the loop: This assumes that if I encounter(dist, w_idx, b_idx)in sorted order, and bike is free, do I assign it to worker? Yes. But what about Worker 0 appearing multiple times with different bikes at same distance? - Example: W0 has Bike A (dist 5), Bike B (dist 5). Sorted list might have
(5, 0, A)then(5, 0, B). If I assignAtoW0, the second entry is skipped becauseans[0]isn’t checked. Wait, my code doesn’t check if worker was assigned. It only checks bike usage. - Is it possible for a Worker to be assigned twice? No, but we need to ensure they aren’t processed again as candidates for other bikes once assigned?
- Actually, the logic
if not used_bikes[b_idx]is slightly insufficient if I don’t track worker assignment status. However, since , every bike can be taken by one person. If Worker 0 gets Bike A (dist 5), and later in sorted list we see(5, 0, B), should we assign it? No, because W0 is already assigned to a bike at the same distance priority level or better. - Wait, if I don’t track worker assignment explicitly,
ans[w_idx]will be overwritten? No, once set, does it matter? The problem asks for “the” index of the bike. If we assign W0 -> Bike A in sorted list(5, 0, A), and later see(5, 0, B)(same dist), if I don’t checkans[w_idx] != -1or similar, do I overwrite? - Actually, the standard greedy logic for this problem implies: Once a worker is assigned their “best” available bike based on global sort order, they are done.
- Let’s refine code slightly to be safer/clearer in comments if needed, but Python list assignment
ans[w_idx] = b_idxworks fine because we iterate sorted pairs. If W0 gets Bike A at dist 5 (first occurrence), later(5, 0, B)appears. We shouldn’t assign another bike to W0? The problem says “assign a bike to each worker”. It implies one-to-one mapping for workers in the output listans. - Wait, if I don’t check
if ans[w_idx] == -1, and simply rely onused_bikes[b_idx]: Case: W0 has Bike A (dist 5), Bike B (dist 6). Sorted order(5, 0, A),(6, 0, B). If I assign A to W0. Later comes B. Used bike check passes? No, ifused_bikesis checked for bike. - Wait, the logic must ensure a worker only gets one bike. The problem asks “Return ans… where ans[i] is index of bike”.
- If I assign W0 -> Bike A (dist 5). Later comes
(6, 0, B).used_bikes[B]might be false. Should I assign? No, because W0 already has a bike. - So yes, strictly speaking we should check if worker is assigned or just rely on the fact that since , and we sort by distance…
- Actually, standard solution for this LeetCode problem usually relies on
ansbeing initialized to -1? Or simply iterating until all workers are filled. - Let’s check: If I have
(5, 0, A)assigned W0->A. Later comes(6, 0, B). Should we assign W0 -> B? No. - So
ans[w_idx]should be checked to ensure worker isn’t already taken. Or simpler: The problem guarantees . If I iterate through sorted pairs and only take if bike is free AND (implicitly or explicitly) worker not assigned yet. - Wait, does the order of
(5, 0, A)vs(6, 0, B)matter? Yes. - Does
ans[w_idx]need to be checked? If I don’t check it, and assign W0->B later (if bike is free), then ans[0] becomes index of second bike. That’s wrong because we want the “closest” one available at that moment in time logic. - However, since
(5, 0, A)comes before(6, 0, B), W0 gets assigned to A first. If I don’t checkans[w_idx] == -1(or similar), and just rely on bike usage… wait. - Actually, the constraint is “assign a bike to each worker”.
- My code snippet above:
if not used_bikes[b_idx]: ans[w_idx] = b_idx. This allows W0 to be assigned multiple times if Bike A was taken by someone else? No, because we iterate sorted pairs. - Wait, what if
(5, 1, C)comes before(6, 0, B). Thenused_bikes[C]=True, then later(6, 0, B)is processed. W0 gets assigned to B. - What about the case where W0 has multiple bikes at same distance? e.g.
(5, 0, A)and(5, 0, B). Sorted order:(5, 0, A), (5, 0, B). First one assignsans[0]=A, marks Bike A used. Second one sees Bike B unused. It would assignans[0]=B! This is WRONG because W0 should only have ONE bike. - Correction: I must check if the worker has already been assigned a bike before assigning another, OR ensure that we stop processing for a specific worker once they are matched?
- Actually, usually in this problem solution logic: We iterate through sorted pairs. If
ans[w_idx] == -1(not yet assigned) ANDused_bikes[b_idx] == False, then assign and mark bike used. - Wait, if I check
if ans[w_idx] != -1: Then for(5, 0, A)-> assigns A. For(5, 0, B)-> skips because W0 assigned? Yes. - But wait, does the problem allow a worker to be skipped in favor of another bike later if that other bike is closer? No, we sort by distance globally.
- So yes, I need
if ans[w_idx] == -1check inside loop or track assigned workers separately. - Wait, looking at the problem statement: “choose (worker, bike) pair with shortest Manhattan… assign”. This implies a global greedy selection of pairs until all workers are satisfied.
- If I have
(5, 0, A)and(6, 1, B). Sorted order is correct. W0 gets A. - Wait, if
ansinitialized to -1. Loop: check bike used? No, need to ensure worker not assigned yet too. - Actually, simpler logic often seen: Iterate through sorted pairs. If both worker and bike are free -> assign. Mark both as busy (worker can be marked in a boolean array or just
ans[i] != -1). - Let’s update the code block to include checking if worker is already assigned (
if ans[w_idx] == -1) OR rely on logic that since we sort by distance, once W0 gets A at dist 5, they won’t get B at dist 6. But what about(5, 0, B)? It has same distance. - Tie-breaker: “smallest worker index”. If multiple pairs have same shortest distance (e.g. W0-BikeA and W1-BikeB both dist 5), we pick smallest Worker Index first. So if W0 is involved in two ties, does it matter?
- Actually, the rule says: choose pair with shortest Manhattan distance… If multiple pairs have same shortest distance (e.g. different workers/bikes at same min dist), choose smallest worker index.
- This implies we pick
(dist=5, w=0)over(dist=6, ...)obviously. But what if W0 has two bikes atdist=5? e.g. Bike A and Bike B both 5 away from W0. - Tie breaker: “smallest worker index”. If we have multiple pairs with same distance (e.g.
(5, 0, A)vs(5, 1, C)), pickw=0. - But what if
(5, 0, A)and(5, 0, B)? Both involve W0. Which one is picked first in sort order? Python sorts tuples element-wise:(dist, w_idx, b_idx). So(5, 0, A)comes before(5, 0, B)ifA < B. - If we assign W0->Bike A (first), then later encounter
(5, 0, B). Should we assign? No. - However, does the problem imply that a worker can only be assigned once? Yes “assign a bike to each worker”.
- So I must ensure
ans[w_idx]is not overwritten or checked for assignment status. Since , every worker gets exactly one bike in the final result. - Wait, if I don’t check
if ans[w_idx] == -1, and simply assign whenever bike is free… Case:(5, 0, A)-> Assigns W0->A. Bike A used. Next pair:(5, 0, B). Bike B unused? Yes (unless someone else took it). If I don’t checkans[w_idx], I assign W0->B! This is wrong because W0 already has a bike at the same distance priority level. - So yes, checking if worker is assigned (
if ans[w_idx] == -1) is necessary to prevent multiple assignments for one worker in this greedy pass? - Wait, actually… If I assign
(5, 0, A), W0 has a bike. The problem says “assign a bike”. It doesn’t say we can re-assign. - So yes,
if ans[w_idx] == -1is required inside the loop to ensure one-to-one mapping logic holds during greedy pass? - Wait, actually… If I have
(5, 0, A)and(6, 0, B). Sorted:(5...), then(6...). Loop 1: Assigns W0->A.ans[0]becomes index of Bike A. Loop 2 (Bike B): If I checkif ans[w_idx] == -1: It is False, so skip. Correct. - Wait, what if
(5, 0, A)and(6, 0, C). W0 assigned to A. - What about the case where a worker has NO bike available? (Not possible here as ).
- So yes, checking
if ans[w_idx] == -1is safer logic for “assign once”. But wait… if I checkans[w_idx], does it affect correctness of other workers? No. - Wait, actually there’s a simpler way: Just track assigned workers in a set or boolean array to avoid re-assignment checks on the list itself (though checking -1 is fine).
- Actually, looking at standard solutions for this problem… many just iterate and assign if bike available? No.
- Wait, let’s trace Example 2:
workers = [[0,0],[1,1],[2,0]], bikes = [[1,0],[2,2],[2,1]]. W0(0,0), B0(1,0) -> dist 1. Pair (1, 0, 0). W0(0,0), B1(2,2) -> dist |0-2|+|0-2|=4. … - If I don’t check
ans[w_idx], and assign multiple bikes to same worker? The output array would have duplicates or overwritten values. Since we need exactly one bike per worker in the final list, overwriting is bad if it happens at a “worse” distance later (impossible due to sort) OR at same distance with higher bike index (bad tie-breaker). - So yes,
if ans[w_idx] == -1check inside loop prevents assigning second bike to W0. - Wait… is it possible that
(5, 0, A)and(6, 0, B)? If I assign A (dist 5), then later see B (dist 6).ans[0]is set. Skip. Correct. - What if W1 has a bike at dist 4? Sorted list puts that first.
- Okay, logic holds: Sort all pairs -> Iterate -> If Bike Free AND Worker Not Assigned Yet -> Assign & Mark Bike Used. (Worker assignment status can be tracked by
ansarray).
Wait, I need to make sure the code block is correct Python syntax and imports are handled or assumed in context of LeetCode class structure. The prompt asks for “Clean, idiomatic Python”. Usually implies inside a function/class method.
class Solution:
def assignBikes(self, workers: List[List[int]], bikes: List[List[int]]) -> List[int]:
pairs = []
# Generate all possible (distance, worker_idx, bike_idx) tuples
for i in range(len(workers)):
w_x, w_y = workers[i]
for j in range(len(bikes)):
b_x, b_y = bikes[j]
dist = abs(w_x - b_x) + abs(w_y - b_y)
pairs.append((dist, i, j))
# Sort by distance (primary), worker index (secondary), bike index (tertiary)
pairs.sort()
ans = [-1] * len(workers)
used_bikes = [False] * len(bikes)
for dist, w_idx, b_idx in pairs:
# Only assign if the worker hasn't been assigned yet
# and this specific bike is still available.
if ans[w_idx] == -1 and not used_bikes[b_idx]:
ans[w_idx] = b_idx
used_bikes[b_idx] = True
return ans
Wait, one detail: The problem says “Repeat this process until there are no available workers”. Since , we will eventually assign all. My loop goes through ALL pairs (). It stops assigning when either bike is taken or worker already has a bike (due to ans[w_idx] == -1). This works perfectly because once W0 gets their best match, they won’t get another one even if better matches for others exist later in the list? Wait.
If I have (5, 0, A) and (6, 1, B).
Sorted: (5, 0, A), (6, 1, B).
Loop 1: Assign W0->A. ans[0] set. Bike A used.
Loop 2: Check W1? No, check pair (6, 1, B). Worker 1 not assigned (ans[1]==-1). Bike B unused. Assign W1->B.
This works correctly for all workers because we iterate through ALL pairs sorted by distance globally. The “greedy” nature is satisfied because the global minimums are processed first.
Wait, check constraints again: 0 <= coordinates < 1000.
ans[i] index of bike. If no bike? Not possible per .
The code looks solid. I will include imports if necessary (List from typing). LeetCode usually provides implicit context but adding type hints is good practice for “Senior Engineer” persona, though standard LC environment might not need from typing import List. However, the prompt asks for clean idiomatic Python. I’ll assume it’s inside a solution class where types are inferred or imported implicitly in modern environments (Python 3.9+ supports list[int]). But to be safe and “clean”, I will use type hints without imports if possible? No, List needs import usually unless using built-in generic syntax with Python 3.9+. LeetCode environment often pre-imports List. To be safest for a standalone snippet:
I’ll write it assuming standard LC context (often doesn’t require explicit import in the code block provided to user). But I will add comments explaining logic clearly.
Wait, check “Your response MUST end immediately after the closing of the code block". This means no text like "Here is the solution" before or after? The prompt says "Structure your response with exactly these sections... Your response MUST end immediately after the closing of the code block — no trailing text.”
So I must ensure there are no newlines/words after the last backtick.
One final check on complexity: . With , . Sorting takes roughly ops. Python handles this in < 1s usually? Yes, sorting integers/tuples is fast C-implementation. Space: List of tuples size . Each tuple small overhead. Memory usage MB max. Acceptable for LeetCode (usually limit 256MB+).
Okay, ready to generate response. I will ensure the code block is at the end and nothing follows it.
Problem Breakdown
We need to assign a unique bike to each worker on a grid based on proximity rules. The goal is to maximize efficiency by always picking the closest available pair (worker-bike). If distances are equal, we prioritize lower worker indices; if those match too, we pick lower bike indices. We repeat this until every worker has a bike ( guarantees all workers get one).
- Inputs:
workers(list of coordinates),bikes(list of coordinates). - Output: List of length , where index is the 0-indexed ID of the assigned bike for worker .
- Constraints/Edge Cases:
- Coordinates are non-negative integers < 1000.
- Locations distinct (no overlaps).
- Since , every worker gets a bike; we don’t need to handle “un