Problem Breakdown
We are given an array nums containing positive integers and need to select a subset of these numbers such that their sum is divisible by 3, maximizing this sum. Since we want the maximum possible sum, our baseline strategy should be to include as many elements as possible—ideally all of them—and only remove specific elements if necessary to satisfy the divisibility constraint.
Inputs:
nums: A list of integers where . Length up to 40,000.
Outputs:
- An integer representing the maximum sum divisible by 3. If no such non-empty subset exists (or even if only an empty set is valid), return 0. Note that since all inputs are positive, a sum of 0 implies we selected nothing.
Implicit Constraints & Edge Cases:
- Empty Result: It’s possible the total sum isn’t divisible by 3 and removing elements to fix it results in no remaining numbers (e.g., input
[4]). In this case, return 0. - Remainder Logic: We only care about
nums[i] % 3. Numbers with remainder 0 don’t affect the modulo of the sum but contribute positively to value; we always keep them unless forced otherwise (which never happens for rem-0 numbers). - Overflow: Python handles large integers automatically, so standard integer overflow isn’t a concern here, though sums can exceed .
Intuition
A brute-force approach would try every possible subset to check divisibility and sum them up. This is exponential time complexity (), which will Time Limit Exceed (TLE) given the constraint of 40,000 elements.
Key Insight: The modulo operation distributes over addition: . This means we can track the total sum’s remainder and fix it by removing specific numbers with small costs. Since we want to maximize the remaining sum, we should remove the smallest possible values that adjust the modulo back to zero.
Optimal Approach:
- Calculate
total_sumof all elements innums. - If
total_sum % 3 == 0, return it immediately (we kept everything). - If not, we need to remove a subset with remainder equal to the current total sum’s modulo inverse:
- Case Remainder = 1: We can either remove one number where , OR two numbers where each has (since ). To maximize the result, we pick whichever option costs less.
- Case Remainder = 2: We can either remove one number where , OR two numbers where each has . Again, choose the minimum cost removal.
Approach
- Initialize
total_sumto sum of all elements innums. - Separate non-zero remainder elements into buckets: those with remainder 1 (
rem_1) and remainder 2 (rem_2). We only need to track the smallest values from these lists because we want to minimize what we remove. - If
total_sum % 3 == 0, returntotal_sum. - Determine which removal strategy is cheaper:
- To fix a remainder of 1: Cost A = min(
rem_1) (if exists), Cost B = sum of two smallest from (rem_2). - To fix a remainder of 2: Cost C = min(
rem_2) (if exists), Cost D = sum of two smallest from (rem_1).
- To fix a remainder of 1: Cost A = min(
- Subtract the minimum valid cost from
total_sum. If no removal is possible for that specific case, ignore it and take the other option. Return 0 if neither works or result becomes invalid.
Complexity Analysis
- Time Complexity: where is the length of
nums. We iterate through the array once to compute sum and categorize remainders. Sorting small lists (at most size N) takes negligible time compared to linear scan, but strictly speaking we can track minimums in one pass for O(1) space logic relative to sorting overhead if optimized; however, collecting into buckets is dominant step. - Space Complexity: where is the number of elements with non-zero remainder (worst case ). We can optimize this to by tracking only minimums during iteration rather than storing lists, but for clarity in an interview setting, bucketing remainders is acceptable.
Solution
from typing import List
def maxSumDivThree(nums: List[int]) -> int:
total_sum = sum(nums)
# If the total sum is already divisible by 3, we don't need to remove anything.
if total_sum % 3 == 0:
return total_sum
# We only care about numbers that affect the modulo remainder (1 or 2).
rem_1 = []
rem_2 = []
for num in nums:
r = num % 3
if r != 0:
if len(rem_1) < 2 and not rem_1[0] > num: # Keep smallest two? No, just track min.
pass
# Optimized tracking to avoid sorting large lists unnecessarily in production code logic
# but for clarity we will collect remainders and sort the small buckets at end.
# Re-iterating with cleaner bucketing logic inside loop or pre-filtered list
rem_1 = [x for x in nums if x % 3 == 1]
rem_2 = [x for x in nums if x % 3 == 2]
# Sort to easily access smallest elements needed for removal
rem_1.sort()
rem_2.sort()
remainder = total_sum % 3
cost_remove_one_rem = float('inf')
cost_remove_two_rems = float('inf')
if remainder == 1:
# Option A: Remove one number with remainder 1
if len(rem_1) > 0:
cost_remove_one_rem = rem_1[0]
# Option B: Remove two numbers with remainder 2 (sum of remainders is 4 -> 1 mod 3)
if len(rem_2) >= 2:
cost_remove_two_rems = sum(rem_2[:2])
elif remainder == 2:
# Option A: Remove one number with remainder 2
if len(rem_2) > 0:
cost_remove_one_rem = rem_2[0]
# Option B: Remove two numbers with remainder 1 (sum of remainders is 2 -> 2 mod 3)
if len(rem_1) >= 2:
cost_remove_two_rems = sum(rem_1[:2])
min_cost = float('inf')
# Check valid costs and pick minimum
if remainder == 1:
candidates = []
if rem_1: candidates.append(cost_remove_one_rem)
if len(rem_2) >= 2: candidates.append(sum(rem_2[:2]))
min_cost = min(candidates) if candidates else float('inf')
elif remainder == 2:
candidates = []
if rem_2: candidates.append(cost_remove_one_rem) # Note variable reuse above was specific to logic branch, re-evaluated below
# Re-logic for clarity in final block vs comments.
# Let's rewrite the selection logic cleanly inside solution function.
return total_sum - min_cost
Wait, I need to ensure the code is correct and clean within one block without variable reuse confusion from my thought process above. The previous snippet had some loose variables. I will write a definitive version now in the final output section below this draft line.
Edge Cases Handled
- No valid subset: If removing elements leaves no numbers (e.g., input
[1]),min_costlogic ensures we don’t subtract more than available or return 0 if impossible to fix remainder without emptying array? Actually, since all inputs are positive, sum of remaining is always 0. The code returns 0 implicitly if no valid removal exists (handled by checking candidates list). - Single element: Handled correctly; loops run once, buckets populated or not, logic checks lengths before accessing indices.
- All divisible by 3: Returns total sum immediately without entering removal logic.
from typing import List
def maxSumDivThree(nums: List[int]) -> int:
# Calculate the maximum possible sum including all elements first
total_sum = sum(nums)
# If already divisible, return it (greedy choice is to keep everything)
if total_sum % 3 == 0:
return total_sum
remainder = total_sum % 3
# We need to remove numbers with specific remainders to fix the modulo.
# Collect only non-zero remainder elements as they are candidates for removal.
rem_1 = []
rem_2 = []
for num in nums:
if num % 3 == 1:
rem_1.append(num)
elif num % 3 == 2:
rem_2.append(num)
# Sort to easily access the smallest elements (which we want to remove)
rem_1.sort()
rem_2.sort()
removal_cost = float('inf')
if remainder == 1:
# Case Remainder is 1. We need to subtract a value congruent to 1 mod 3.
# Option A: Remove one number with remainder 1 (cost = smallest rem_1)
cost_a = float('inf')
if rem_1:
cost_a = rem_1[0]
# Option B: Remove two numbers with remainder 2 (sum of remainders is 4 -> 1 mod 3)
cost_b = float('inf')
if len(rem_2) >= 2:
cost_b = sum(rem_2[:2])
removal_cost = min(cost_a, cost_b)
elif remainder == 2:
# Case Remainder is 2. We need to subtract a value congruent to 2 mod 3.
# Option A: Remove one number with remainder 2 (cost = smallest rem_2)
cost_a = float('inf')
if rem_2:
cost_a = rem_2[0]
# Option B: Remove two numbers with remainder 1 (sum of remainders is 2 -> 2 mod 3)
cost_b = float('inf')
if len(rem_1) >= 2:
cost_b = sum(rem_1[:2])
removal_cost = min(cost_a, cost_b)
# If we couldn't find a valid way to remove elements (e.g. no candidates exist),
# then the max divisible sum is effectively 0 in this context relative to total_sum logic?
# Actually if remainder exists and we can't fix it, result should be 0 because any subset found would have been covered by greedy inclusion of all valid ones minus removals.
# However, since nums[i] >= 1, sum is always positive unless empty set chosen (sum=0).
# If min_cost remains inf, we can't form a divisible sum > 0? Wait, if total_sum % 3 != 0 and no fix possible -> return 0.
if removal_cost == float('inf'):
return 0
return total_sum - removal_cost