Chapter 05: Storage Volumes - Command Reference
1. Disk & Partition Management
1.1 Listing Block Devices
| Command | Description | Example |
|---|---|---|
lsblk |
Lists all block devices in a tree view, showing size, type, and mount points | lsblk |
lsblk -f |
Lists block devices with filesystem information (type, UUID, label) | lsblk -f |
blkid |
Displays block device attributes including UUID, label, and filesystem type | blkid |
blkid /dev/sdb1 |
Shows attributes for a specific device | blkid /dev/sdb1 |
cat /proc/partitions |
Shows in-memory partitioning information from the kernel | cat /proc/partitions |
1.2 MBR Partitioning (fdisk)
| Command | Description | Example |
|---|---|---|
fdisk /dev/sdb |
Opens fdisk interactive partitioning tool for MBR/GPT disks | fdisk /dev/sdb |
fdisk -l /dev/sdb |
Lists partition table of a disk without entering interactive mode | fdisk -l /dev/sdb |
fdisk -l |
Lists partition tables of all detected disks | fdisk -l |
Interactive fdisk subcommands (entered after running fdisk /dev/sdX):
| Subcommand | Description | Example |
|---|---|---|
m |
Display help menu | (inside fdisk) m |
n |
Create a new partition | (inside fdisk) n → p (primary) / e (extended) |
p |
Print the current partition table | (inside fdisk) p |
d |
Delete a partition | (inside fdisk) d → partition number |
t |
Change partition type | (inside fdisk) t → 8e (LVM) / 82 (swap) / 83 (Linux) |
l |
List all available partition types | (inside fdisk) l |
w |
Write changes to disk and exit | (inside fdisk) w |
q |
Quit without saving changes | (inside fdisk) q |
g |
Convert MBR to GPT partition table | (inside fdisk) g |
o |
Create a new empty MBR partition table | (inside fdisk) o |
1.3 GPT Partitioning (gdisk)
| Command | Description | Example |
|---|---|---|
gdisk /dev/sdc |
Opens gdisk interactive partitioning tool for GPT disks | gdisk /dev/sdc |
gdisk -l /dev/sdc |
Lists GPT partition table without entering interactive mode | gdisk -l /dev/sdc |
Interactive gdisk subcommands (entered after running gdisk /dev/sdX):
| Subcommand | Description | Example |
|---|---|---|
n |
Create a new GPT partition | (inside gdisk) n → partition number → start → end → type (e.g., 8e00 for LVM) |
p |
Print the current partition table | (inside gdisk) p |
d |
Delete a partition | (inside gdisk) d → partition number |
t |
Change partition type | (inside gdisk) t → partition number → 8e00 (LVM) / 8200 (swap) |
w |
Write changes to disk and exit | (inside gdisk) w |
q |
Quit without saving changes | (inside gdisk) q |
1.4 Parted Partitioning
| Command | Description | Example |
|---|---|---|
parted /dev/sdc |
Opens parted interactive partitioning tool | parted /dev/sdc |
parted /dev/sdc mklabel gpt |
Creates a GPT partition table on a disk (non-interactive) | parted /dev/sdc mklabel gpt |
parted /dev/sdc mklabel msdos |
Creates an MBR (DOS) partition table on a disk | parted /dev/sdc mklabel msdos |
parted /dev/sdc mkpart pri 1 200m |
Creates a partition named “pri” from 1MB to 200MB | parted /dev/sdc mkpart pri 1 200m |
parted /dev/sdc print |
Prints the partition table | parted /dev/sdc print |
parted /dev/sdc rm 1 |
Removes partition number 1 | parted /dev/sdc rm 1 |
Interactive parted subcommands:
| Subcommand | Description | Example |
|---|---|---|
mklabel gpt |
Create GPT partition table | (inside parted) mklabel gpt |
mklabel msdos |
Create MBR partition table | (inside parted) mklabel msdos |
mkpart |
Create a new partition | (inside parted) mkpart → name → fs_type → start → end |
print |
Print partition table | (inside parted) print |
rm |
Remove a partition | (inside parted) rm → partition number |
quit |
Quit parted | (inside parted) quit |
1.5 Partition Table Refresh
| Command | Description | Example |
|---|---|---|
partprobe |
Manually re-reads the partition table from the kernel | partprobe |
2. File System Creation & Management
2.1 Creating File Systems (mkfs)
| Command | Description | Example |
|---|---|---|
mkfs.xfs /dev/sdb1 |
Formats a partition with the XFS file system (RHEL 9 default) | mkfs.xfs /dev/sdb1 |
mkfs.ext4 /dev/sdb1 |
Formats a partition with the Ext4 file system | mkfs.ext4 /dev/sdb1 |
mkfs.vfat /dev/sdb1 |
Formats a partition with the VFAT (FAT32) file system | mkfs.vfat /dev/sdb1 |
mkfs -t ext4 /dev/sdb1 |
Formats a partition specifying the filesystem type with -t | mkfs -t ext4 /dev/sdb1 |
mkfs /dev/sdb1 |
Formats with default Ext2 (not recommended) | mkfs /dev/sdb1 |
mkfs.xfs -L mylabel /dev/sdb1 |
Creates XFS filesystem with a label | mkfs.xfs -L mylabel /dev/sdb1 |
mkfs.ext4 -L mylabel /dev/sdb1 |
Creates Ext4 filesystem with a label | mkfs.ext4 -L mylabel /dev/sdb1 |
2.2 Managing Ext4 File System Properties
| Command | Description | Example |
|---|---|---|
tune2fs -l /dev/sdb1 |
Lists all Ext4 file system properties and features | tune2fs -l /dev/sdb1 |
tune2fs -o acl,user_xattr /dev/sdb1 |
Sets default mount options (ACL and extended attributes) | tune2fs -o acl,user_xattr /dev/sdb1 |
tune2fs -o ^acl,user_xattr /dev/sdb1 |
Removes default mount options | tune2fs -o ^acl,user_xattr /dev/sdb1 |
tune2fs -O has_journal /dev/sdb1 |
Enables a file system feature | tune2fs -O has_journal /dev/sdb1 |
tune2fs -O ^has_journal /dev/sdb1 |
Disables a file system feature | tune2fs -O ^has_journal /dev/sdb1 |
tune2fs -L mylabel /dev/sdb1 |
Sets a label on an Ext file system | tune2fs -L mylabel /dev/sdb1 |
e2label /dev/sdb1 |
Shows the current label of an Ext file system | e2label /dev/sdb1 |
e2label /dev/sdb1 mylabel |
Sets a label on an Ext file system | e2label /dev/sdb1 mylabel |
2.3 Managing XFS File System Properties
| Command | Description | Example |
|---|---|---|
xfs_admin -L mylabel /dev/sdb1 |
Sets a label on an XFS file system | xfs_admin -L mylabel /dev/sdb1 |
xfs_admin -l /dev/sdb1 |
Shows the current label of an XFS file system | xfs_admin -l /dev/sdb1 |
2.4 File System Resizing
| Command | Description | Example |
|---|---|---|
xfs_growfs /mnt |
Grows an XFS file system (online, mounted) | xfs_growfs /mnt |
resize2fs /dev/sdb1 |
Resizes an Ext4 file system to fill the partition | resize2fs /dev/sdb1 |
resize2fs /dev/sdb1 500M |
Resizes an Ext4 file system to a specific size (must be unmounted for shrinking) | resize2fs /dev/sdb1 500M |
3. Mounting & Unmounting File Systems
3.1 Manual Mounting
| Command | Description | Example |
|---|---|---|
mount /dev/sdb1 /mnt |
Mounts a file system on a directory | mount /dev/sdb1 /mnt |
mount -t xfs /dev/sdb1 /mnt |
Mounts specifying the file system type | mount -t xfs /dev/sdb1 /mnt |
mount UUID="5d34b37c-..." /mnt |
Mounts a file system by its UUID | mount UUID="5d34b37c-5d32-4790-8364-d22a8b8f88db" /mnt |
mount LABEL=mylabel /mnt |
Mounts a file system by its label | mount LABEL=mylabel /mnt |
mount -a |
Mounts all file systems listed in /etc/fstab that are not already mounted | mount -a |
mount |
Lists all currently mounted file systems | mount |
mount | grep exercise |
Filters mounted file systems | mount | grep exercise |
3.2 Unmounting
| Command | Description | Example |
|---|---|---|
umount /dev/sdb1 |
Unmounts a file system by device name | umount /dev/sdb1 |
umount /mnt |
Unmounts a file system by mount point | umount /mnt |
3.3 Mount Verification & Inspection
| Command | Description | Example |
|---|---|---|
df -h |
Shows disk space usage in human-readable format | df -h |
df -T |
Shows disk space usage with file system type | df -T |
findmnt |
Shows mounted file systems in a tree view | findmnt |
findmnt --verify |
Verifies /etc/fstab syntax and alerts on errors | findmnt --verify |
findmnt /mnt |
Shows information about a specific mount point | findmnt /mnt |
3.4 /etc/fstab Configuration
| Command | Description | Example |
|---|---|---|
cat /etc/fstab |
Displays the contents of the fstab file | cat /etc/fstab |
vim /etc/fstab |
Edits the fstab file to add persistent mount entries | vim /etc/fstab |
fstab entry format:
UUID=xxx /mounts/data xfs defaults 0 0
/dev/sdb6 none swap defaults 0 0
3.5 Systemd Mount Units
| Command | Description | Example |
|---|---|---|
systemctl enable --now exercise.mount |
Enables and starts a systemd mount unit | systemctl enable --now exercise.mount |
systemctl status exercise.mount |
Shows the status of a systemd mount unit | systemctl status exercise.mount |
cat /run/systemd/generator/repo.mount |
Views auto-generated systemd mount file from fstab | cat /run/systemd/generator/repo.mount |
4. Swap Management
4.1 Swap Partition/File Creation
| Command | Description | Example |
|---|---|---|
mkswap /dev/sdb6 |
Formats a partition as swap space | mkswap /dev/sdb6 |
mkswap /swapfile |
Formats a file as swap space | mkswap /swapfile |
dd if=/dev/zero of=/swapfile bs=1M count=100 |
Creates a 100 MiB swap file filled with zeros | dd if=/dev/zero of=/swapfile bs=1M count=100 |
4.2 Swap Activation & Deactivation
| Command | Description | Example |
|---|---|---|
swapon /dev/sdb6 |
Activates a swap partition | swapon /dev/sdb6 |
swapon /swapfile |
Activates a swap file | swapon /swapfile |
swapon --show |
Shows currently active swap devices | swapon --show |
swapoff /dev/sdb6 |
Deactivates a swap partition | swapoff /dev/sdb6 |
4.3 Swap Information
| Command | Description | Example |
|---|---|---|
free -m |
Shows total, used, and free memory and swap in MB | free -m |
free -h |
Shows memory and swap in human-readable format | free -h |
5. Logical Volume Manager (LVM)
5.1 Physical Volume (PV) Management
| Command | Description | Example |
|---|---|---|
pvcreate /dev/sdd1 |
Initializes a disk or partition as an LVM physical volume | pvcreate /dev/sdd1 |
pvcreate /dev/sdd1 /dev/sde1 |
Initializes multiple devices as physical volumes | pvcreate /dev/sdd1 /dev/sde1 |
pvs |
Shows a summary of all physical volumes | pvs |
pvdisplay |
Shows detailed information about all physical volumes | pvdisplay |
pvdisplay /dev/sdd1 |
Shows detailed information about a specific PV | pvdisplay /dev/sdd1 |
pvremove /dev/sdd1 |
Removes LVM metadata from a physical volume | pvremove /dev/sdd1 |
pvmove /dev/sdd4 |
Moves used extents from a PV to other PVs in the VG | pvmove /dev/sdd4 |
pvmove -v /dev/sdd4 /dev/sdd3 |
Moves extents from one PV to a specific target PV (verbose) | pvmove -v /dev/sdd4 /dev/sdd3 |
5.2 Volume Group (VG) Management
| Command | Description | Example |
|---|---|---|
vgcreate vgdata /dev/sdd1 |
Creates a volume group from one or more PVs | vgcreate vgdata /dev/sdd1 |
vgcreate -s 16 vgdata /dev/sdd1 |
Creates a VG with a custom physical extent size (16 MiB) | vgcreate -s 16 vgdata /dev/sdd1 |
vgcreate -s 64 vg20 /dev/sdd |
Creates a VG with 64 MiB PE size | vgcreate -s 64 vg20 /dev/sdd |
vgs |
Shows a summary of all volume groups | vgs |
vgdisplay |
Shows detailed information about all volume groups | vgdisplay |
vgdisplay vgdata |
Shows detailed information about a specific VG | vgdisplay vgdata |
vgdisplay -v vgdata |
Shows verbose details including PV and LV info | vgdisplay -v vgdata |
vgextend vgdata /dev/sdd2 |
Adds a PV to an existing volume group | vgextend vgdata /dev/sdd2 |
vgextend vg20 /dev/sdd1 /dev/sdc |
Adds multiple PVs to a volume group | vgextend vg20 /dev/sdd1 /dev/sdc |
vgreduce vgdata /dev/sdd4 |
Removes a PV from a volume group (after pvmove) | vgreduce vgdata /dev/sdd4 |
vgremove vgdata |
Removes a volume group (must have no LVs or use -f) | vgremove vgdata |
vgremove -f vg20 |
Forcefully removes a VG along with its LVs | vgremove -f vg20 |
5.3 Logical Volume (LV) Management
| Command | Description | Example |
|---|---|---|
lvcreate -n lvdata -L 5G vgdata |
Creates a 5 GiB logical volume named lvdata | lvcreate -n lvdata -L 5G vgdata |
lvcreate -n lvdata -l 100 vgdata |
Creates an LV with 100 logical extents | lvcreate -n lvdata -l 100 vgdata |
lvcreate -n lvdata -l 50%FREE vgdata |
Creates an LV using 50% of free VG space | lvcreate -n lvdata -l 50%FREE vgdata |
lvcreate -L 1G -n lvdemo vgdemo |
Creates a 1 GiB LV named lvdemo | lvcreate -L 1G -n lvdemo vgdemo |
lvcreate -l 100 -n webvol vg20 |
Creates an LV with 100 extents named webvol | lvcreate -l 100 -n webvol vg20 |
lvs |
Shows a summary of all logical volumes | lvs |
lvdisplay |
Shows detailed information about all LVs | lvdisplay |
lvdisplay /dev/vgdata/lvdata |
Shows detailed info about a specific LV | lvdisplay /dev/vgdata/lvdata |
lvextend -r -L +1G /dev/vgdata/lvdata |
Extends an LV by 1 GiB and resizes the filesystem (-r) | lvextend -r -L +1G /dev/vgdata/lvdata |
lvextend -r -l +50%FREE /dev/vgdata/lvdata |
Extends an LV by 50% of free VG space and resizes FS | lvextend -r -l +50%FREE /dev/vgdata/lvdata |
lvextend -L +500M /dev/vgdemo/lvdemo /dev/sdd4 |
Extends LV using free extents from a specific PV | lvextend -L +500M /dev/vgdemo/lvdemo /dev/sdd4 |
lvresize -r -L +1G /dev/vgdata/lvdata |
Resizes an LV by adding 1 GiB and resizes the FS | lvresize -r -L +1G /dev/vgdata/lvdata |
lvresize -r -l 75%VG /dev/vgdata/lvdata |
Resizes LV to 75% of total VG size (may shrink!) | lvresize -r -l 75%VG /dev/vgdata/lvdata |
lvresize -r -l +75%VG /dev/vgdata/lvdata |
Adds 75% of total VG size to the LV | lvresize -r -l +75%VG /dev/vgdata/lvdata |
lvresize -r -l +75%FREE /dev/vgdata/lvdata |
Adds 75% of free VG space to the LV | lvresize -r -l +75%FREE /dev/vgdata/lvdata |
lvreduce -L 80M /dev/vgdata/lvol0 |
Reduces an LV to 80 MiB (Ext4 only; unmount first!) | lvreduce -L 80M /dev/vgdata/lvol0 |
lvremove /dev/vgdata/lvdata |
Removes a logical volume | lvremove /dev/vgdata/lvdata |
lvremove /dev/vg20/webvol |
Removes a specific LV from a VG | lvremove /dev/vg20/webvol |
lvrename vgdata lvdata lvnewname |
Renames a logical volume | lvrename vgdata lvdata lvnewname |
6. Stratis Storage Management
6.1 Stratis Installation & Service
| Command | Description | Example |
|---|---|---|
dnf install stratisd stratis-cli |
Installs the Stratis daemon and CLI tools | dnf install stratisd stratis-cli |
systemctl enable --now stratisd |
Enables and starts the Stratis daemon service | systemctl enable --now stratisd |
systemctl status stratisd |
Checks the status of the Stratis daemon | systemctl status stratisd |
6.2 Stratis Pool Management
| Command | Description | Example |
|---|---|---|
stratis pool create mypool /dev/sde |
Creates a Stratis pool from one or more block devices | stratis pool create mypool /dev/sde |
stratis pool list |
Lists all Stratis pools | stratis pool list |
stratis pool add-data mypool /dev/sdf |
Adds a block device to an existing Stratis pool | stratis pool add-data mypool /dev/sdf |
stratis pool add-data pool1 /dev/sdh |
Adds /dev/sdh to pool named pool1 | stratis pool add-data pool1 /dev/sdh |
stratis pool rename mypool newpool |
Renames a Stratis pool | stratis pool rename mypool newpool |
stratis pool destroy mypool |
Destroys a Stratis pool and all its file systems | stratis pool destroy mypool |
stratis blockdev list |
Lists all block devices used by Stratis pools | stratis blockdev list |
6.3 Stratis File System Management
| Command | Description | Example |
|---|---|---|
stratis fs create mypool stratis1 |
Creates a Stratis file system in a pool | stratis fs create mypool stratis1 |
stratis fs list |
Lists all Stratis file systems | stratis fs list |
stratis fs list mypool |
Lists file systems in a specific pool | stratis fs list mypool |
stratis filesystem snapshot mypool stratis1 stratis1-snap |
Creates a snapshot of a Stratis file system | stratis filesystem snapshot mypool stratis1 stratis1-snap |
stratis filesystem list |
Shows statistics about current file system usage | stratis filesystem list |
stratis fs rename mypool stratis1 newname |
Renames a Stratis file system | stratis fs rename mypool stratis1 newname |
stratis fs destroy mypool stratis1-snap |
Destroys a Stratis file system or snapshot | stratis fs destroy mypool stratis1-snap |
6.4 Mounting Stratis File Systems
| Command | Description | Example |
|---|---|---|
mount /dev/stratis/mypool/stratis1 /stratis1 |
Mounts a Stratis file system manually | mount /dev/stratis/mypool/stratis1 /stratis1 |
mount /dev/stratis/mypool/stratis1-snap /mnt |
Mounts a Stratis snapshot read-only | mount /dev/stratis/mypool/stratis1-snap /mnt |
fstab entry for Stratis (must use UUID):
UUID=xxx /stratis1 xfs defaults,x-systemd.requires=stratisd.service 0 0
7. VDO (Virtual Data Optimizer)
7.1 VDO Installation & Service
| Command | Description | Example |
|---|---|---|
dnf install vdo kmod-kvdo |
Installs the VDO software packages | dnf install vdo kmod-kvdo |
systemctl enable --now vdo |
Enables and starts the VDO service | systemctl enable --now vdo |
systemctl status vdo |
Checks the operational status of the VDO service | systemctl status vdo |
7.2 VDO Volume Management
| Command | Description | Example |
|---|---|---|
vdo create --name vdo-vol1 --device /dev/sdf --vdoLogicalSize 16GB --vdoSlabSize 128MB |
Creates a VDO volume with specified name, device, logical size, and slab size | vdo create --name vdo-vol1 --device /dev/sdf --vdoLogicalSize 16GB --vdoSlabSize 128MB |
vdo |
Lists all VDO volumes | vdo |
vdo status --name vdo-vol1 |
Shows detailed status and configuration for a VDO volume | vdo status --name vdo-vol1 |
vdo remove --name vdo-vol1 |
Removes a VDO volume by name | vdo remove --name vdo-vol1 |
vdostats |
Shows usage statistics for all VDO volumes | vdostats |
vdostats --human-readable |
Shows VDO statistics in human-readable format | vdostats --human-readable |
vdostats --verbose |
Shows detailed VDO statistics including compression and dedup ratios | vdostats --verbose |
8. Package Management (Storage-Related)
| Command | Description | Example |
|---|---|---|
dnf install stratisd stratis-cli |
Installs Stratis packages | dnf install stratisd stratis-cli |
dnf install vdo kmod-kvdo |
Installs VDO packages | dnf install vdo kmod-kvdo |
9. System & Service Management (Storage-Related)
| Command | Description | Example |
|---|---|---|
systemctl enable --now stratisd |
Enables and starts the Stratis daemon | systemctl enable --now stratisd |
systemctl enable --now vdo |
Enables and starts the VDO service | systemctl enable --now vdo |
systemctl status stratisd |
Checks the Stratis daemon status | systemctl status stratisd |
systemctl status vdo |
Checks the VDO service status | systemctl status vdo |
systemctl daemon-reload |
Reloads systemd configuration after editing unit files | systemctl daemon-reload |
10. General Utility Commands
| Command | Description | Example |
|---|---|---|
mkdir /mounts/data |
Creates a mount point directory | mkdir /mounts/data |
mkdir -p /mounts/data |
Creates a mount point directory (including parents) | mkdir -p /mounts/data |
dd if=/dev/zero of=/swapfile bs=1M count=100 |
Creates a file of specified size filled with zeros | dd if=/dev/zero of=/swapfile bs=1M count=100 |
dd if=/dev/zero of=/mnt/bigfile bs=1M count=1100 |
Creates a large test file (used to verify multi-PV data) | dd if=/dev/zero of=/mnt/bigfile bs=1M count=1100 |
cat /proc/partitions |
Displays kernel-tracked partition information | cat /proc/partitions |
reboot |
Reboots the system (to apply partition table changes if needed) | reboot |
Quick Reference: LVM Workflow
- Create partitions →
fdisk /dev/sdd(set type to8efor LVM) - Initialize PV →
pvcreate /dev/sdd1 - Create VG →
vgcreate vgdata /dev/sdd1 - Create LV →
lvcreate -n lvdata -l 50%FREE vgdata - Format LV →
mkfs.xfs /dev/vgdata/lvdata - Mount LV →
mount /dev/vgdata/lvdata /files - Persist mount → Add entry to
/etc/fstab - Verify →
lsblk,df -h,mount
Quick Reference: Stratis Workflow
- Install →
dnf install stratisd stratis-cli - Start service →
systemctl enable --now stratisd - Create pool →
stratis pool create mypool /dev/sde - Create FS →
stratis fs create mypool stratis1 - Find UUID →
stratis fs list - Mount → Add UUID entry to
/etc/fstabwithx-systemd.requires=stratisd.service - Verify →
mount -a,stratis fs list
Quick Reference: VDO Workflow
- Install →
dnf install vdo kmod-kvdo - Start service →
systemctl enable --now vdo - Create volume →
vdo create --name vdo1 --device /dev/sdf --vdoLogicalSize 16GB - Verify →
vdo,vdostats --human-readable - Format & mount →
mkfs.xfs /dev/mapper/vdo1, then mount normally