Domain 1Network FundamentalsCORE

Packet Life Cycle and Forwarding

The step-by-step process of how a packet travels through a network, including routing decisions, switching, and ingress/egress processing.

Domain: Domain 1: Network Fundamentals•Updated: 2026-08-26
#Packet Flow#Forwarding#Routing Process#Switching Process#Ingress/Egress

Packet Lifecycle and Forwarding Process

Core Forwarding Principles

  • Concept: The process of encapsulating, routing, and de-encapsulating data as it travels from a source device to a remote destination across multiple Layer 3 devices (routers).
  • Details:
    • Layer 3 (IP Addresses): The Source and Destination IP addresses never change from the original sender to the final receiver. They provide end-to-end delivery.
    • Layer 2 (MAC Addresses): The Source and Destination MAC addresses change at every router hop. They provide hop-by-hop delivery.
    • TTL (Time to Live): The IP header’s TTL decreases by 1 at each router hop.
    • Checksum: The IP header checksum is recalculated at each router because the TTL changes.

Things to note: A router’s primary job is to strip the incoming Layer 2 header, evaluate the Layer 3 destination IP against its routing table, and attach a new Layer 2 header appropriate for the outgoing interface.

The ARP (Address Resolution Protocol) Process

  • Concept: ARP is used to discover the Layer 2 MAC address of a known Layer 3 IPv4 address on the same local broadcast domain.
  • Details:
    • ARP Request: Sent as a Broadcast (Destination MAC: FFFF.FFFF.FFFF). Asks “Who has [Target IP]? Tell [Sender IP]”.
    • ARP Reply: Sent as a Unicast directly back to the requester. Says “I am [Target IP], my MAC is [Target MAC]”.
    • Devices cache ARP replies in their ARP table to avoid broadcasting for every packet.
! ARP Request Frame Structure
Destination MAC: FFFF.FFFF.FFFF (Broadcast)
Source MAC:      [Sender MAC]
Destination IP:  [Target IP]
Source IP:       [Sender IP]
Message:         "Who has [Target IP]? Tell [Sender IP]"

! ARP Reply Frame Structure
Destination MAC: [Original Sender MAC] (Unicast)
Source MAC:      [Target MAC]
Destination IP:  [Original Sender IP]
Source IP:       [Target IP]
Message:         "I am [Target IP], my MAC is [Target MAC]"

Things to note: When a host needs to send traffic to a remote network, it sends the frame to its Default Gateway’s MAC address, NOT the final destination’s MAC address. The IP destination remains the final remote host.

Router vs. Switch Processing

  • Concept: Layer 2 switches and Layer 3 routers handle frames and packets fundamentally differently.
Feature Layer 2 Switch Layer 3 Router
Primary Operation Forwards frames based on Destination MAC Routes packets based on Destination IP
Header Modification Never modifies Source/Dest MAC or IP Strips incoming L2 header, adds new L2 header
Broadcast Handling Floods broadcasts out all ports (except receiving) Blocks broadcasts by default (does not forward)
ARP Handling Learns MAC addresses from incoming frames Generates ARP requests/replies to find next-hop MACs
Domain Boundary Separates Collision Domains Separates Broadcast Domains

Hop-by-Hop Packet Evolution

  • Concept: Tracking the exact Source/Destination IP and MAC addresses as a packet traverses from PC1 to PC4.
  • Details:
    • PC1: 192.168.1.1 (MAC: 1111)
    • R1: G0/2: 192.168.1.254 (MAC: AAAA) | G0/0: 192.168.12.1 (MAC: BBBB)
    • R2: G0/0: 192.168.12.2 (MAC: CCCC) | G0/1: 192.168.24.2 (MAC: DDDD)
    • R4: G0/1: 192.168.24.4 (MAC: EEEE) | G0/2: 192.168.4.254 (MAC: FFFE)
    • PC4: 192.168.4.1 (MAC: 4444)
sequenceDiagram
    participant PC1
    participant SW1
    participant R1
    participant R2
    participant R4
    participant SW4
    participant PC4

    PC1->>SW1: ARP Request (Who has 192.168.1.254?)
    SW1->>R1: Floods ARP Request
    R1->>SW1: ARP Reply (I am 192.168.1.254, MAC AAAA)
    SW1->>PC1: Forwards ARP Reply
    
    PC1->>SW1: Data Packet (Src IP: 1.1, Dst IP: 4.1 | Src MAC: 1111, Dst MAC: AAAA)
    SW1->>R1: Forwards Frame to R1
    
    R1->>R1: De-encapsulates L2, Checks Routing Table
    R1->>R2: ARP Request (Who has 192.168.12.2?)
    R2->>R1: ARP Reply (I am 192.168.12.2, MAC CCCC)
    
    R1->>R2: Data Packet (Src IP: 1.1, Dst IP: 4.1 | Src MAC: BBBB, Dst MAC: CCCC)
    
    R2->>R2: De-encapsulates L2, Checks Routing Table
    R2->>R4: ARP Request (Who has 192.168.24.4?)
    R4->>R2: ARP Reply (I am 192.168.24.4, MAC EEEE)
    
    R2->>R4: Data Packet (Src IP: 1.1, Dst IP: 4.1 | Src MAC: DDDD, Dst MAC: EEEE)
    
    R4->>R4: De-encapsulates L2, Checks Routing Table
    R4->>SW4: ARP Request (Who has 192.168.4.1?)
    PC4->>R4: ARP Reply (I am 192.168.4.1, MAC 4444)
    
    R4->>SW4: Data Packet (Src IP: 1.1, Dst IP: 4.1 | Src MAC: FFFE, Dst MAC: 4444)
    SW4->>PC4: Forwards Frame to PC4
Hop Outgoing Interface Source IP Dest IP Source MAC Dest MAC
PC1 to R1 PC1 NIC 192.168.1.1 192.168.4.1 1111 AAAA (R1 G0/2)
R1 to R2 R1 G0/0 192.168.1.1 192.168.4.1 BBBB (R1 G0/0) CCCC (R2 G0/0)
R2 to R4 R2 G0/1 192.168.1.1 192.168.4.1 DDDD (R2 G0/1) EEEE (R4 G0/1)
R4 to PC4 R4 G0/2 192.168.1.1 192.168.4.1 FFFE (R4 G0/2) 4444 (PC4 NIC)

Things to note: When PC4 replies to PC1, the process reverses. Because the ARP caches are already populated, the routers will not generate new ARP requests; they will simply de-encapsulate and re-encapsulate the frames using the cached MAC addresses.

Common Exam Misconceptions

  • Concept: Exam questions frequently test your ability to identify specific MAC/IP addresses at a specific point in the network topology.
  • Details:
    • Misconception 1: “The destination MAC address is always the final destination device.”
      • Correction: The destination MAC is always the MAC address of the next-hop device (e.g., the Default Gateway). It only equals the final destination’s MAC if they are on the same local subnet.
    • Misconception 2: “Switches change the MAC addresses in the frame.”
      • Correction: Switches are transparent to the payload. They forward the frame exactly as received, only reading the destination MAC to make a forwarding decision. They do not alter the Source or Destination MAC addresses.
    • Misconception 3: “Routers forward broadcasts.”
      • Correction: Routers drop Layer 2 broadcasts (like ARP requests). A broadcast from PC1 will never reach R2.

Relevant Commands

! View the ARP table (IP to MAC mappings)
Router# show arp
Router# show ip arp

! View the MAC address table on a switch (Learned MACs per port)
Switch# show mac address-table

! View the routing table (Used to determine the next-hop IP)
Router# show ip route

! View interface details including IP and burned-in MAC address
Router# show ip interface brief
Router# show interfaces gigabitEthernet 0/0

! Clear the ARP cache to force a new ARP request
Router# clear arp-cache