Domain 1Network FundamentalsCORE

LAN Network Architecture

Designing and understanding LAN architectures, including two-tier and three-tier hierarchical models for enterprise campus networks.

Domain: Domain 1: Network Fundamentals•Updated: 2026-08-26
#LAN Architecture#Campus Network#Two-Tier#Three-Tier#Network Design

LAN Architecture

Common Network Topologies

  • Concept: The physical or logical layout of how network devices are interconnected.
  • Details:
    • Star Topology: Multiple devices connect to a single central device (e.g., PCs connecting to a central switch).
    • Full Mesh Topology: Every device is connected to every other device (e.g., 6 routers fully interconnected). Provides maximum redundancy but high cost.
    • Partial Mesh Topology: Some devices are connected to each other, but not all (e.g., top switches connected to all, bottom switches not directly connected to each other).
    • Hybrid Topology: A combination of two or more different topologies.
graph LR
    subgraph Star
        C((Switch))
        A[PC 1] --- C
        B[PC 2] --- C
        D[PC 3] --- C
    end

    subgraph Full Mesh
        R1[R1] --- R2[R2]
        R1 --- R3[R3]
        R2 --- R3
    end

    subgraph Partial Mesh
        SW1[SW1] --- SW2[SW2]
        SW1 --- SW3[SW3]
        SW2 --- SW3
        SW2 --- SW4[SW4]
        SW3 --- SW4
    end

Things to note: In network diagrams, devices might not be drawn in a literal star shape, but if many devices connect to one central device, it is logically a star topology.

Traditional Campus LAN Design

  • Concept: Hierarchical network design used in enterprise networks (buildings or nearby buildings).
  • Details: Designed to be scalable, manageable, and resilient.

Two-Tier LAN Design (Collapsed Core)

  • Concept: Consists of two layers: Access Layer and Distribution Layer. Omits the Core layer (or combines Core and Distribution into one layer).
  • Details:
    • Access Layer:
      • End hosts (PCs, printers, cameras, WAPs) connect here.
      • High port density.
      • Quality of Service (QoS) marking is typically done here (mark traffic as early as possible).
      • Security services: Port security, Dynamic ARP Inspection (DAI), DHCP snooping.
      • Power over Ethernet (PoE) enabled switchports for WAPs and IP phones.
    • Distribution Layer:
      • Aggregates connections from Access layer switches (typically a redundant pair).
      • Border between Layer 2 (L2) and Layer 3 (L3).
      • Runs both L3 (OSPF) and L2 (Spanning Tree Protocol - STP).
      • Connections from Access to Distribution are typically L2 (STP blocks links to prevent loops).
      • End hosts use Switch Virtual Interfaces (SVIs) on Distribution switches as default gateways.
      • Uses First Hop Redundancy Protocols (FHRPs) like HSRP or VRRP for redundant virtual IPs.
      • Connects to services (Internet, WAN) and other parts of the LAN.
      • Also called the Aggregation Layer or Core-Distribution Layer.

Three-Tier LAN Design

  • Concept: Adds a Core Layer to the Two-Tier design. Recommended by Cisco if there are more than three distribution layers in a single location.
  • Details:
    • Core Layer:
      • Connects separate Distribution layers together in large LANs.
      • Focus: Speed and “fast transport”.
      • Avoid CPU-intensive operations (security features, QoS marking/classification). Just fast packet forwarding.
      • All connections are Layer 3.
      • No Spanning Tree Protocol (STP) at the Core Layer.
      • High redundancy for devices and connections (backbone of the LAN).
graph TD
    subgraph Core Layer
        C1[Core Switch 1] --- C2[Core Switch 2]
    end
    subgraph Distribution Layer
        D1[Dist Switch 1] --- D2[Dist Switch 2]
    end
    subgraph Access Layer
        A1[Access Switch 1]
        A2[Access Switch 2]
    end
    
    C1 --- D1
    C1 --- D2
    C2 --- D1
    C2 --- D2
    
    D1 --- A1
    D1 --- A2
    D2 --- A1
    D2 --- A2

Things to note: In a 2-tier design, the distribution layer must fulfill the role of the core layer, which is why it is sometimes called the Core-Distribution layer.

Spine-Leaf Architecture (Data Center)

  • Concept: A modern 2-tier architecture designed for data centers to handle high East-West traffic (server-to-server traffic) caused by virtualization and distributed applications. Also known as Clos architecture.
  • Details:
    • Spine Switches:
      • Form the backbone of the fabric.
      • Connect to every Leaf switch.
      • Do not connect to other Spine switches.
    • Leaf Switches:
      • Connect to end hosts (servers) - acts like the Access layer.
      • Connect to every Spine switch.
      • Do not connect to other Leaf switches.
    • Key Characteristics:
      • Consistent Latency: Every server is separated by the exact same number of hops (e.g., Leaf -> Spine -> Leaf), providing predictable latency for East-West traffic.
      • Load Balancing: Traffic paths are randomly chosen to balance load among Spine switches.
      • Scalability: Easily scaled by adding a new Leaf switch and connecting it to all existing Spine switches.
graph TD
    subgraph Spine Layer
        S1[Spine 1]
        S2[Spine 2]
        S3[Spine 3]
    end
    subgraph Leaf Layer
        L1[Leaf 1]
        L2[Leaf 2]
        L3[Leaf 3]
    end
    subgraph Servers
        Server1[Server 1]
        Server2[Server 2]
        Server3[Server 3]
    end

    L1 --- S1
    L1 --- S2
    L1 --- S3
    
    L2 --- S1
    L2 --- S2
    L2 --- S3
    
    L3 --- S1
    L3 --- S2
    L3 --- S3
    
    Server1 --- L1
    Server2 --- L2
    Server3 --- L3

Things to note: Traditional 3-tier designs caused bottlenecks and variable latency for East-West traffic because traffic had to traverse up to the core and back down. Spine-leaf solves this by keeping the hop count consistent.

SOHO (Small Office / Home Office) Networks

  • Concept: Small networks (e.g., home networks, small businesses) with simple needs and few devices.
  • Details:
    • All networking functions are consolidated into a single multipurpose device, often called a Home Router or Wireless Router.
    • Combined Functions:
      • Router: Connects the internal network to the Internet (ISP).
      • Switch: Provides a few physical switchports for wired devices.
      • Firewall: Typically blocks inbound unsolicited connections while allowing outbound internal connections.
      • Wireless Access Point (WAP): Provides Wi-Fi connectivity.
      • Modem: Sometimes integrated for cable/DSL Internet (though often a separate device).

Things to note: Enterprise networks use dedicated devices for each function, but SOHO networks combine them into one small, inexpensive device.

Comparison of LAN Architectures

Feature Traditional 2-Tier Traditional 3-Tier Spine-Leaf
Layers Access, Distribution Access, Distribution, Core Spine, Leaf
Primary Use Case Small/Medium Enterprise Large Enterprise Campus Modern Data Centers
L2/L3 Boundary Distribution Layer Distribution Layer Leaf Switches (typically)
STP Usage Yes (Access/Distribution) Yes (Access/Distribution) No (Uses L3 routing)
Traffic Focus North-South North-South East-West
Scalability Moderate High Extremely High

Important Concepts & Misconceptions

  • Misconception: The Core layer is just a “faster” Distribution layer.
    • Correction: The Core layer is strictly Layer 3 and must not perform packet manipulation (like ACLs, QoS marking, or STP). Its sole focus is fast transport.
  • Misconception: Spine-Leaf is a 3-tier architecture.
    • Correction: Spine-Leaf is a strictly 2-tier architecture (Spine and Leaf).
  • Rule of Thumb: Cisco recommends adding a Core layer if you have more than 3 Distribution blocks in a single location.
  • FHRP & STP Interaction: In a 2-tier/3-tier design, STP runs at the Access/Distribution boundary (L2), while FHRPs (HSRP/VRRP) provide default gateway redundancy at the Distribution layer (L3 SVIs).

Commands Summary

Note: This lesson focuses on network design theory and architecture. There are no specific IOS CLI commands introduced in this transcript.