Domain 1Network FundamentalsCORE

WAN Network Architecture

Wide Area Network (WAN) architectures and connectivity options, including MPLS, leased lines, broadband, and internet-based VPNs.

Domain: Domain 1: Network Fundamentals•Updated: 2026-08-26
#WAN#MPLS#Leased Lines#Broadband#Internet

WAN Architectures (CCNA 200-301 Topics 1.2.d, 5.5)

WAN Fundamentals & Topologies

  • Concept: A Wide Area Network (WAN) connects geographically separate Local Area Networks (LANs), such as offices in different cities or countries, or connects an enterprise to a service provider.
  • Details: The CCNA focuses on the WAN from the enterprise (customer) perspective, not the service provider perspective.
  • Topology: Hub-and-Spoke is the most common WAN topology. The central site (e.g., data center) is the hub, and remote sites are the spokes.
graph TD
    Hub[Hub / Data Center] -->|Leased Line / MPLS| Spoke1[Spoke / Office A]
    Hub -->|Leased Line / MPLS| Spoke2[Spoke / Office B]
    Hub -->|Leased Line / MPLS| Spoke3[Spoke / Office C]

Things to note: A major advantage of a hub-and-spoke topology over a full-mesh topology is centralized traffic control. All inter-office traffic can be routed through a central firewall at the hub for inspection and policy enforcement.

Leased Lines

  • Concept: A dedicated, private physical link connecting two sites, provided by a service provider.
  • Details:
    • Traditionally uses serial connections with Layer 2 encapsulations like HDLC or PPP (not Ethernet).
    • Modern alternatives increasingly use Ethernet over fiber optics due to longer distance capabilities and higher speeds.
    • Standards:
      • North America: T1 (1.544 Mbps), T2, T3.
      • Europe/Other regions: E1, E2, E3.
  • Disadvantages: Higher cost, longer installation lead times, and generally slower speeds compared to modern Ethernet WANs.

MPLS (Multi-Protocol Label Switching)

  • Concept: A service provider technology that uses shared infrastructure but creates secure VPNs (Virtual Private Networks) for customers by separating traffic using labels.
  • Details:
    • Often called a Layer 2.5 protocol because the MPLS label is inserted between the Layer 2 header and the Layer 3 IP header.
    • Forwarding decisions within the provider network are based on the MPLS label, not the destination IP address.
  • Router Types:
    • CE (Customer Edge): The customer’s router. Connects to the PE router. Does NOT run MPLS.
    • PE (Provider Edge): The service provider’s router at the edge of their network. Connects to the CE router and adds/removes MPLS labels.
    • P (Provider Core): Internal service provider routers that forward labeled traffic. Do not connect directly to customers.
graph LR
    CE1[CE Router<br/>No MPLS] ---|Ethernet/Serial| PE1[PE Router<br/>Adds Label]
    PE1 ---|MPLS Label Switching| P1[P Router<br/>Core]
    P1 ---|MPLS Label Switching| PE2[PE Router<br/>Removes Label]
    PE2 ---|Ethernet/Serial| CE2[CE Router<br/>No MPLS]
  • MPLS VPN Types:
    • Layer 3 MPLS VPN: CE and PE routers form routing protocol peerings (e.g., OSPF) or use static routes. The CE router learns remote routes via the PE router.
    • Layer 2 MPLS VPN: CE and PE routers do not form peerings. The service provider network is completely transparent, acting like a giant Layer 2 switch. The CE routers’ WAN interfaces are in the same subnet, and they can peer directly with each other (e.g., OSPF adjacency forms directly between CE routers).

Things to note: A common misconception is that CE routers must run MPLS. They do not; MPLS is strictly a Provider (PE and P) router function.

Internet Connectivity & Redundancy

  • Concept: Enterprises can use public Internet infrastructure for WAN connectivity, requiring specific access technologies and redundancy designs.
  • Details:
    • DSL (Digital Subscriber Line): Provides Internet over existing phone lines. Requires a modem (modulator-demodulator) to convert data formats.
    • CATV (Cable): Provides Internet over existing cable television lines. Requires a cable modem.
    • Fiber Optic Ethernet: Rapidly growing in popularity for both enterprise and consumer access due to high speeds over long distances.
  • Redundancy Terminology:
    • Single-homed: 1 connection to 1 ISP (No redundancy).
    • Dual-homed: 2 connections to the same 1 ISP (Limited redundancy).
    • Multihomed: 1 connection to each of 2 different ISPs (Good redundancy).
    • Dual-multihomed: 2 connections to each of 2 different ISPs (Maximum redundancy).

Internet VPNs

  • Concept: Because the public Internet is shared and insecure by default, VPNs (Virtual Private Networks) are used to encrypt and encapsulate traffic, creating secure private connections over public infrastructure.

Site-to-Site VPNs (IPsec)

  • Concept: Creates a point-to-point encrypted tunnel between two network devices (e.g., routers or firewalls) to connect two entire sites.
  • Details:
    • Original packet is combined with a session/encryption key and encrypted.
    • Encrypted packet is encapsulated with a VPN header and a new IP header.
    • Receiving router decrypts the packet and forwards the original payload to the destination host.
  • Limitation: Standard IPsec only supports unicast traffic. It does not support broadcast or multicast, meaning routing protocols like OSPF cannot run natively over an IPsec tunnel.

GRE over IPsec

  • Concept: Combines the flexibility of GRE (Generic Routing Encapsulation) with the security of IPsec.
  • Details: GRE can encapsulate a wide variety of Layer 3 protocols and supports broadcast/multicast traffic, but it is not secure (no encryption). By encapsulating the packet in GRE first, and then encrypting that GRE packet with IPsec, you gain both multicast support and security.
  • Encapsulation Order:
    1. [Original Packet] + [GRE Header] + [New IP Header]
    2. Encrypt the resulting GRE packet.
    3. Add [IPsec Header] + [New IP Header].

DMVPN (Dynamic Multipoint VPN)

  • Concept: A Cisco-developed solution that allows routers to dynamically create a full mesh of IPsec tunnels without manually configuring every single tunnel.
  • Details:
    • Step 1: Configure static IPsec tunnels from each spoke to a central Hub router (Hub-and-Spoke topology).
    • Step 2: The Hub router dynamically provides spoke routers with the information needed to form direct, on-demand IPsec tunnels with other spokes.
  • Benefit: Combines the configuration simplicity of hub-and-spoke with the traffic efficiency of full-mesh spoke-to-spoke communication.
graph TD
    Hub[Hub Router]
    Spoke1[Spoke 1]
    Spoke2[Spoke 2]
    Spoke3[Spoke 3]
    Hub ===|Static IPsec Tunnel| Spoke1
    Hub ===|Static IPsec Tunnel| Spoke2
    Hub ===|Static IPsec Tunnel| Spoke3
    Spoke1 -.->|Dynamic Spoke-to-Spoke Tunnel| Spoke2
    Spoke2 -.->|Dynamic Spoke-to-Spoke Tunnel| Spoke3

Remote-Access VPNs (TLS)

  • Concept: Allows individual end devices (PCs, mobile phones) to securely access a company’s internal resources over the Internet.
  • Details:
    • Typically uses TLS (Transport Layer Security), formerly known as SSL (Secure Sockets Layer). TLS is the same protocol that secures HTTPS.
    • Requires VPN client software (e.g., Cisco AnyConnect) installed on the end device.
    • The end device forms a secure TLS tunnel directly to a company router or firewall acting as a TLS server.

Comparison: Site-to-Site vs. Remote-Access VPNs

Feature Site-to-Site VPN Remote-Access VPN
Primary Protocol IPsec (often with GRE or DMVPN) TLS (formerly SSL)
Endpoint Devices Router-to-Router or Firewall-to-Firewall End Device (PC/Mobile) to Router/Firewall
Scope of Service Secures traffic for all devices at the connected sites Secures traffic for the single end device with the client
Use Case Permanent, continuous connection between branch offices On-demand access for remote workers (e.g., work from home)
Client Software Not required on end hosts (handled by gateway) Required on the end device (e.g., Cisco AnyConnect)

Configuration & Conceptual Summary

Note: The CCNA exam requires you to “describe” these WAN architectures. No specific CLI configuration commands are tested for these conceptual topics. However, the logical encapsulation steps are summarized below for exam readiness.

! CONCEPTUAL ENCAPSULATION: GRE over IPsec
! 1. Original unicast/multicast packet is generated.
! 2. GRE Header and new IP Header are added (enables multicast).
! 3. The entire GRE packet is encrypted using an encryption algorithm and session key.
! 4. IPsec Header and new outer IP Header are added for secure transport over the Internet.

! CONCEPTUAL ENCAPSULATION: Standard IPsec Site-to-Site
! 1. Original unicast packet is generated.
! 2. Packet is encrypted using an encryption algorithm and session key.
! 3. IPsec Header and new outer IP Header are added.

Things to note:

  • T1 leased line speed is exactly 1.544 Mbps.
  • CE routers do NOT run MPLS; only PE and P routers process MPLS labels.
  • Layer 2 MPLS VPNs make the provider network transparent, allowing CE routers to form direct OSPF peerings as if connected by a switch.
  • DSL utilizes existing telephone lines, while CATV utilizes existing cable television lines.